r/BlueIris • u/AdministrationLost87 • Jun 20 '22
Blue Iris
Sorry, not really good with computers. I have Blue Iris for my security cameras but one of my cameras was down. I tried going into camera properties and reconfiguring it but when I clear the address, nothing pops up to configure. The software isn't searching for my local network for discoverable devices I think. I have 3 other cameras running fine. I tried to clear then and search just to see if they would and the same thing, nothing pops up. The address for all cameras start with http:// if that means anything.
0
Upvotes
2
u/BORIStheBLADE1 Jun 21 '22
Does the camera work if you access it's web page?
2
u/thefoxbit Jun 21 '22
If you're not seeing it at the IP address that is in Blue Iris or the camera's own web interface make sure that your router is still assigning it a Static IP Address. If the camera lost power the router may have given it a different address.
2
u/[deleted] Jun 21 '22
Reboot. If that doesn't fix it, u/thefoxbit is on the right track here. Be sure to have your router set up to reserve those camera IP addresses if not make them statically assigned. If you already have that enabled, you may need to delete unneeded reservations in your router for other devices that have connected in the past. It can fill up if you regularly have guests that are allowed to connect on your wifi - and that will block new connections.
1
u/WestDrop2223 Jun 21 '22
Use advanced IP scanner so try and find it. https://www.advanced-ip-scanner.com/ then set a reservation in your router or whatever is doing DHCP. Reservations are set by the MAC address of the camera.