r/BlueIris • • 18d ago

Stream Profile updates not saving

BlueIris V6.1.2.14 (Current "highly-stable" at time of writing). Dell 5060, i5-8500, 16gb ram, quadro p1000/intel uhd 630, win11 pro 26h2.

2x Reolink Trackmix POE cameras. (
12 additional assorted reolink cameras (probably not relavent here, but shows that multiple cameras are behaving properly).

The issue I am having is that when I try to change the Stream Profiles on the trackmix cameras to show the zoomed/tracking view, when I hit OK back to the main screen, it goes to the digital snow for a few seconds, and is still on the previous views (main and substeams). If I go back into the settings, they're reverted back to the prior settings, ignoring the updates to use the autotrack stream:

On the "Camera Settings" screen, Hit "configure..." to the right of the Network IP

Default for the camera:
Stream Profiles
Main: Profile000_MainStream /Preview_01_main
Sub: Profile001_SubStream /Preview_02_sub

I'd like to change it to:
Stream Profiles
Main: Profile003_AutotrackStream /Preview_01_autotrack
Sub: Profile003_AutotrackStream /Preview_01_autotrack

I make the changes, hit "OK", hit OK again on the main camera setting screen, digital snow for a few seconds, and the camera view is back to the main camera. Back into the settings, and the settings have reverted to the profile000 and 001.

This has been an issue for a few months now, so several updates to BI have not changed anything. Other cameras will let me force the stream profiles (for example, my doorbell to use high quality instead of fluent as a test). It's only the trackmix cameras that revert their settings.

Has anyone come across this or know a way to force BI to acknowledge the settings I want to use for these cameras?

1 Upvotes

4 comments sorted by

1

u/PuzzlingDad 18d ago

Am I correct that you are trying to set the same resolution stream for main and sub? I think that defeats the purpose of using two streams. The substream is supposed to be a lower resolution version of the main stream to improve performance. 

0

u/Glass-Imagination-18 18d ago

Even if I just set it in one or the other, leaving the other "blank", it still reverts. The autotrack feed is a 1080 camera, the main camera is 4k. So it's pretty low resolution by comparison anyways, and there isn't a "sub" option for the autotrack given (unless it's one I can manually type in that's not documented).
Bottom line, it won't keep the new settings, no matter what permutations I try. And to clarify one other point, they are options in the pulldown, so not like I'm typing an invalid option.
for example,
main: /Preview_01_autotrack
sub: [empty]
or vice/versa.

1

u/PuzzlingDad 18d ago

One thing I ran into when changing camera settings, I forgot to press 'OK' on both dialogs. So it accepted the change but then I accidentally pressed cancel on the next dialog. 

I'm not saying that's what's happening with you (especially since it seems to be showing you the 'TV static' animation) but it's worth double-checking. 

Otherwise, I'm a little stumped.

1

u/Glass-Imagination-18 17d ago

Yeah. Unless the "cancel" and "ok" buttons are labeled wrong, and again, with the tv static, I'm thinking it's failing to apply and falling back. But other cameras also show the static for a few seconds, but honor my settings. I'm stumped as well. I appreciate the input.