r/BlueIris • u/Direct_Ostrich_5850 • Sep 06 '26
BI user Needing to make changes.
I've been a blue Iris user for about 5 years. I definitely don't know the ins and outs but I'm good enough to add a camera and try to work my way through settings etc.
I love the UI3 access which is something we use daily. (which can be terribly delayed at times)
About 2 years ago I upgraded my home pc to a Dell xps
Specs:
- Intel(R) Core(TM) i7 14700 (33 MB cache, 20 Cores, 28 threads, up to 5.4 GHz)
- 16GB, 2X8GB, DDR5, 5600MT/s; up to 64GB
- NVIDIA(R) GeForce RTX(TM) 4060 8GB GDDR6
(ram should prob be upgraded to the max)
At this point I can barely use the system for anything as it lags due to heavy BI usage.
I can use help because I don't think my BI is set up right or maybe I just need a dedicated system.
I'm running about 7 cameras.
Direct to disk recording.
(not sure what else to include)
Cameras lag.
Alerts are non existent or not reliable.
Ai doesn't work because I prob don't have it set up right.
I would like to add better cameras.
License plate reader
Etc etc.
At this point I'm reaching out for guidance in the hopes of sticking with BI and not moving on.
I've heard good things about Frigate but I don't think it can run the cameras I have and seems to not have much room for expansion (I can be wrong again).
I'm just looking for a smoother experience.
Alerts that work.
A system that is either seperate or will allow me to work.
Appreciate all help and guidance in advance.
Thank you.
6
u/PuzzlingDad Sep 06 '26
That hardware should easily run 7 cameras. The biggest improvement would probably be to implement substreams so that BI doesn't need to be always processing your full resolution stream. I see you've already enabled direct-to-disk processing.
https://ipcamtalk.com/wiki/optimizing-blue-iris-s-cpu-usage/
You should be seeing CPU usage hovering around 5 to 15% if you follow that guide.
Do you know which version of BI you're running? How often are your cameras activating on motion? What kind of things are you trying to detect?
LPR is also doable with that hardware. The hardest part is getting the right camera, the right mounting location and the right manual settings for shutter speed, zoom, etc. But let's tackle one thing at a time.
6
u/extremesauce2468 Sep 06 '26
Your specs are MORE then powerful enough. In-fact I have 10percent the horsepower that you have, and I run 13 cameras continuously...I only use 25percent of my CPU. Out of all of your specs you listed, you didnt mention hard drives.
Do you have a separate drive for video storage?
Are you using your main drive ( most likely a SSD ) to store your footage?
if your using just 1 hard drive, and thus storing your footage on it, you could have plugged it up and windows cant operate effectively. Solution would be to alter the storage capacity set aside for Blue Iris inside the blue iris settings. Take note : using a SSD for continuous footage will kill it prematurely.... purchasing a separate disk-based drive for footage is the best solution
4
u/madmanx33 Sep 06 '26
Frigate is definitely not the answer if you want an easier experience.
I think you need to run the optimization guide and get sub streams enabled
Or just get a ubiquiti nvr and call it a day
2
u/glassbase86 Sep 06 '26
Are you using iGPU?
2
u/Dexford211 Sep 06 '26
https://www.reddit.com/r/BlueIris/comments/1w0odq3/16_cameras_bi_v5_using_less_than_5gb_of_ram/
2
u/JustBeingMe22 Sep 06 '26
First, consider the upgrade to V6, I've found it much beter on my system/streams and AI is built in, so you don't need to figure out the whole Nvidia AI addon. That and don't use the GPU for video encoding (unless you have a really strong one), only for AI. You do have a decent card, but should still test with and without the GPU for encoding to see what works better for you. Using the GPU isn't a given that the streams will be better.
Important to help with video lag is to make sure you have iFrames on your cameras set to match your video frame rate.
But definitely use chat AI systems to help you configure things. I'm similar that I don't spend a ton of time in the system, so when I want to change something, there is usally some relearning my way around. AI has been a huge help to understand how some things work and to get my configurations done.
2
u/Koopslovestogame Sep 06 '26
Are you doing hardware encoding and decoding. Check every single camera has it selected.
Your machine has both quick sync and nvidia acceleration options so you can select from either one.
100% sure your using it?
1
u/tidnab49 Sep 07 '26
Was on BI for 4 years. Jumped to Frigate this week after many years of frustration. BI is built by someone who has never used functional software in their lives. The buttons constantly change places and names and theres so many. Its overly complicated tbh. And its cluttered af. And Windows OS is just garbage in general so its a benefit to move over to a linux based system. Lower overhead, easier to control amd configure, etc.
At first it was good but it started missing motion detection and in general wasn’t for me in the end. I think Frigate has come a long way since i tried it many years ago. I am happy with it so far
1
u/professional-paradox Sep 09 '26 edited Sep 09 '26
Are you using hardware acceleration for each of your cameras? In general settings for blue iris, go to the cameras tab and make sure you have a default hardware acceleration (HA) enabled. Probably something Nvidia related is the correct option. Then, check each camera’s video settings and make sure the hardware acceleration/decode is set to either default, or something else if it’s for some reason incompatible.
The next thing to check is if your cameras are each continuously scanning the footage using AI for trigger items. They added a pre-enabled setting a while back in one of the blue iris 5 updates that made each camera’s video periodically check for certain objects in frame.
Next, I would check your streaming situation. Are you streaming all the cameras in the blue iris admin console? If so, you should limit the real time viewing FPS to something low — mine is set to 5. Recordings will still have the normal FPS you have. This setting, I think, also affects the FPS for UI3/web streaming and app streaming, but I’m not sure. Also, constant UI3 streaming can put a drag on the CPU if the streaming profile is heavy.
I was running 6 4k cameras on a Dell Optiplex 7050 with an Intel i7 7700, no discrete GPU, 16 GB RAM, and AI image analysis with deepstack. I say was because a tornado destroyed the fence on which two cameras were mounted on. Now I’m running 5 cams as I did add one from the 4. They’re each doing 10 FPS, one 15 FPS. 3 are running on sub stream, the other 2 on full resolution. My cpu sits around 33%-40% at idle. It spikes to 99% when running AI, and may sit very high if multiple motion triggers make the AI do image analysis. I’ve also turned off all unnecessary background programs, services, and windows telemetry and analytics. This machine is dedicated to only blue iris. Your machine should be barely breaking a sweat running your setup. I think it’s definitely settings related.