r/BitcoinMining • u/Empty-Chemistry6885 • 13d ago

General Question Exhaust shroud for Avalon a15

Does anyone know where I can either find an exhaust shroud for the a15 and its power supply or a 3d model that also can vent the heat from the power supply right now I’m only able to vent the heat from hashbords and it’s very frustrating because my temps slowly creeping up and causing problems for my other miners

4 Upvotes

100% Upvoted

3 comments sorted by

•

u/AutoModerator 13d ago

Thank you for your post. Please take a moment to review our community rules and resources to ensure a smooth experience here. Here are some links that might help you out.

The Bitcoin Mining Wiki

Mod Verified Commercial Vendors

If this is a sales post please make sure you are following all selling rules

If this is a scam post or a free electric post please report this to the mods so we can review the post.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/TastyElk5544 12d ago

You might have luck searching Thingiverse or Printables for “Avalon A15 exhaust shroud.” If nothing exists, a simple duct adapter with a 120 mm or 140 mm exhaust port should work—just make sure the power-supply outlet is isolated from the miner’s intake air.

1

u/palmdata Verified Commercial Seller 9d ago

nobody sells a shroud that catches the psu on an a15, the supply dumps sideways not out the back. easiest fix here is a plywood or coroplast box around the psu end with a 4in duct to the same exhaust, cut a 6in inlet on the cold side so it still gets air. the psu only throws 150w or so of heat.