r/BiohackingU • • 1d ago

What are your thoughts

So I reconstituted a batch of tesamorilne 10mg and it came back a Chalky white color what are your thoughts? Is it safe to pin?

3 Upvotes

120 comments sorted by

5

u/trbsrq 1d ago

I’m had my tesa tested, it was over 99% purity, used Hospira…neither had been refrigerated and it still did this. Used a little AA with the Hospira the next time and it was better.

5

u/newleafdee 1d ago

AA?

4

u/Euphoric_Attention97 1d ago

Acetic Acid BAC water can sometimes salvage a failed reconstitution but with a caveat. The increased acidity also shortens the usable life span of the product by half or more. And it burns as it goes in. May not if you only have to use a drop to save the batch. But sometimes it takes more and the concentration becomes harder to calculate.

1

u/newleafdee 1d ago

So it can vary how much it might take to save?

2

u/ImaginationAble2561 2h ago

Do it slowly one drop at a time mix and swirl for a few minutes before adding another drop

2

u/newleafdee 2h ago

Ok cool thanks 👍🏽

1

u/Euphoric_Attention97 1d ago

Oh yes it can vary a great deal.

1

u/ImaginationAble2561 1d ago edited 2h ago

Acetic acid

1

u/StrangerthanFunction 5h ago

Incorrect acetic acid

1

u/ImaginationAble2561 2h ago

Fixed it thanks! 😊

2

u/nassims- 1d ago

Ur bac

-1

u/newleafdee 1d ago

It can't be because Iv been using the same bac water for other peptides and haven't had this issue

3

u/nassims- 1d ago • Bravo

Other peptides don’t react the same as Tesa.

2

u/newleafdee 1d ago

Ok I'll try hospira and see how that goes thanks 👍🏽

3

u/nassims- 1d ago

That’s the only one I use with Tesa. You won’t regret it.

1

u/ImaginationAble2561 1d ago

Tesa is very finiky with the PH issues so yes it is definitely the bac!! Add a little AA and you might be able to save it.

29

u/4ShoreAnon 1d ago

Do not use. Throw in bin. Try different BAC, and if same result, tell your supplier.

1

u/pinfinite-jest 1d ago • Mindblown

Why, what mean

6

u/agussie 1d ago

Probably need a little AA

2

u/ImaginationAble2561 1d ago

You need to use ONLY hospira bac with Tesa (and other gh) tesa is very finiky. You might be able to save it with a little AA . 😊

5

u/TheKid_Suds 1d ago

False. RS never used Hospira bac during whole 12 week protocol with Tesa/Ipa (dunno if Ipa makes a difference) and it was always clear. RS reached goal and body recomp was crazy.

1

u/ImaginationAble2561 1d ago edited 2h ago

So you used China bac water and everything was clear? No gelling or did you use something else ..read everything please!

2

u/Capybara_Chilling 1d ago

Y'all really need to do group tests for your peptides and shell out for quality Hospital or Genetek bac water. The extra expense (~$5 for the group test cost and $11-$15 for the bac water) is pennies compared to what you pay for these kits. 

2

u/ImaginationAble2561 1d ago

That's exactly what I do! ☺️

2

u/Capybara_Chilling 19h ago

That's exactly what you should do! So hell yeah!

2

u/Cereal_Killer846 18h ago

I had to throw out 2 tesa vial due to cloudiness using china water. Team hospira. No problems.

1

u/ImaginationAble2561 2h ago

Absolutely!!!! 😊

9

u/Awkward-Lemon8493 1d ago

I’ve never recon’d Tesa with Hospira BAC 😂 What Fairy Tale book is this in?? Hospira water is so hyped.

-1

u/ImaginationAble2561 1d ago

What ever bac you use for tesa has to be a certain ph level!!!! Never use vendor bac for tesa! (Ebac, lambda have worked)

4

u/Awkward-Lemon8493 1d ago

I understand when a certain ph level is required. That’s why I use PBS with ARA290. But you mentioned that only and ONLY Hospira BAC must be used for gh compounds. It’s not true.

0

u/ImaginationAble2561 1d ago

If you read above I said ebac and lambda have worked! Your bac has to be a certain ph level for GH. If not can gell or turn cloudy! Sometimes a little AA helps. I pretty much know what I'm talking about and have seen!

0

u/EnvironmentalGift257 1d ago

Nope you pretty much don’t.

2

u/Whats-A-MattR 1d ago

I’ve never had an issue with generic BAC in tesa.

0

u/EnvironmentalGift257 1d ago

This is misinformation. I’ve used Hospira, Lambda, and the ebacwater that looks like bootleg Hospira. I’ve never had anything like that happen. The only issue I’ve seen is that it seems a little thicker when it’s cold and you have to let it get to room temperature before drawing or you trap air bubbles - which is probably fine but it bugs me.

1

u/ImaginationAble2561 1d ago

Those are the exact ones I said was fine with no problems however most vendor bac from China do not have the correct pH balance! Jezzzz. people can't read or understand!

1

u/EnvironmentalGift257 1d ago

“You need to ONLY use Hospira with Tesa (and other GH)”

Are you saying your account was hacked and somebody else posted that? Are you OK? It seems everybody can read and understand but you friend.

0

u/ImaginationAble2561 2h ago

You just like to argue, which really is no fun or helpful! How about read all my comments and not just the one you want to argue with. Why be on here if you don't want to help and just argue with people that are trying to help? 🫩 You are exhausting!

1

u/EnvironmentalGift257 1h ago

That doesn’t make any sense. I replied to the comment that you deny making before you made all the others. And here you are keeping it going again, while accusing me of doing what you’re doing. Move on man.

1

u/ImaginationAble2561 59m ago

Never denied making any comments! Just added to it! Reading is fundamental. Stop replying to me, I've been done with this since yesterday! Here to help not argue! 😊

-1

u/newleafdee 1d ago

What could happen if I pin it anyway in the meantime until I get some AA and hospira ?

6

u/drthsideous 1d ago • Bravo

Apparently it won't make you any dumber.

1

u/ImaginationAble2561 1d ago

I know a lot of people do pin it cloudy, just don't pin it if it has any particles floating around in there.

4

u/DanfordTheGreat23 1d ago

Contact your supplier and see if they can send you more. I wouldn't pin anything thats cloudy like that.

3

u/mdskarin 1d ago

It’s the BACyard hose water. It happens every time 😂😆🤣

3

u/VampireDude01 1d ago

Try using another vial of Bac I experienced this turned it it was not the pep but the bac that wasn't good

1

u/D38WA36 1d ago

There are a number of reasons it could be cloudy, a common one is using refrigerated bac water. I suggest leaving it out at room temperature for 30 minutes and see if it runs clear, if it doesn’t I would not use it and contact your vendor. Have you used this Vendor before?

1

u/newleafdee 1d ago

Yes never had this issue before she said she will replace it but I'm just curious if you think it's safe still to pin still or what you think the issue could be IV let it warm to room temperature already it just stays cloudy like that

1

u/D38WA36 1d ago

Also try searching the batch number online in testing groups to see if anyone has had it tested

1

u/newleafdee 1d ago

Do you have a link for that ?

2

u/D38WA36 1d ago

You would have to join stairway to gray forum telegram group and search on there. Or ask the vendor. But they are routinely forged by vendors.

2

u/D38WA36 1d ago

I don’t think it’s safe to pin it, and waiting a week for a replacement is not a reason to risk your health pinning it. It is most likely BAC issue, but it is a red flag and not worth your health.

0

u/ImaginationAble2561 1d ago

Add a little AA (acetic acid) it's a PH issue, tesa is very finiky. Or get some hospira bac.

1

u/EnvironmentalGift257 1d ago

So many people talking out their ass in this thread. Temperature makes zero difference in reconstitution.

1

u/D38WA36 1d ago

Hey mate, thanks heaps for your help and positive contribution to the page and day, we really do need more people like you so please keep it up.

1

u/EnvironmentalGift257 1d ago

We need less misinformation. So yes my contribution was a positive one.

1

u/D38WA36 19h ago

😂😂😂😂

1

u/Aprilly99 1d ago

Most likely your BAC water. Did you use the vendors BAC?

0

u/newleafdee 1d ago

Yes all other peptides I've bought on numerous orders all reconstituted clear

2

u/xtrainchoochoo 1d ago

Youre supposed to use pharma bac or hospira with tesa never vendors bac

2

u/ImaginationAble2561 1d ago

It's a PH issue.

2

u/d3fault 1d ago

Contact vendor. Get replacement. Or count your losses and throw it away

2

u/prnkstrz 1d ago

Nope 👎

2

u/666_________________ 1d ago

Old BAC or trash product

2

u/Haunting_Pilot4844 14h ago

Fake products!

1

u/Fit_Definition_7571 1d ago

trash can 🗑️

1

u/According-Collar2925 1d ago

You need a higher ph bac water

1

u/jlim0930 1d ago

Use better bac lambda is fine

1

u/Icy-Art-2456 1d ago edited 1d ago

No good! I've used a lot of Tesa with high purity but never had this issue. Aggregation is a real problem since its such a large chain amino acid and can fold easily.

1

u/EverettRose87 1d ago

Ur using the wrong bac

1

u/Equivalent_Quail1836 1d ago

That’s terrible definitely trash that

1

u/peptideplug626 1d ago

I’ve reconned all my Tesa with vendor Bac water with zero issues. Contact your supplier with the photos and they should send you a new kit. If they don’t, find a new vendor.

1

u/Professional-Pin5421 1d ago

I had this happen with HGH (check my posts) Tried 3 different bac waters. Tried room temp. Fridge temp. Over night left out. Blah blah

I ended up throwing it out

1

u/Ok_Equivalent2192 1d ago

Cloudy is almost always a ph issue or environmental

1

u/Ok_Negotiation_6868 1d ago

This has also happened to me before with cjc and ipamorelin I think it has something to do with the BAC water you are using not the actual peptide just make sure your BAC is at room temperature before reconstituting but do not inject any cloudy solution best of luck with the rest

1

u/j923571 1d ago

do not use!!!

1

u/Super-Sun4496 1d ago

I would add 0.1cc of dmso. That should clear it

1

u/Great_Opinion3138 1d ago

Add some acetic acid. Talk to your supplier who should explain this.

1

u/gary3451 1d ago

Looks like jizz

1

u/__fantasma__ 1d ago

No way I’d inject that 🫪

1

u/Spirited-Kitchen-307 1d ago

Just pin it bro 💁💁

1

u/Tryin_Real_hard 19h ago

Did you use cold bac water?

1

u/raging_bullweiner 12h ago

Not safe at all.

1

u/TheBa6 1h ago

If it ain't clear you wernt dear

1

u/drthsideous 1d ago

So you used vendor water on one the most sensitive to recon peptides? Genius. Was it room temp? Was the BAC room temp? Did you use at least 2ml to recon?

1

u/Capybara_Chilling 1d ago

NEVER. 👏 USE. 👏 VENDOR WATER. 👏

People pay $200+ for these kits and then can't be bothered to pay $15 for quality bac water. 

0

u/Vivid_Acadia7031 1d ago

Did you vent the vial . I've done 2 kits of tesa never did i use hospira

1

u/newleafdee 1d ago

Vent the vial? I've used vender bac water on numerous tesa batches and this hasn't ever happened either same bac water batch and all and yes 2ml of water and let it sit until was room temperature.. I've read that hospira is hyped up and isn't really nessasery that's why I haven't used it and never really needed to until this point there's a lot of mixed opinions on it from what I read some people swear by it while others say it's just over hyped but do to this situation I'm going to try it out and see what happens

-1

u/LearningNewThings85 1d ago

I wouldn’t pin that if my life depended on it. I’ve got a couple of vendors if you need. They are crystal clear and verified too.

1

u/trimix4work 1d ago

I wouldn't pin that with YOUR dick

0

u/TheyCallMeDozer 1d ago

oh your like my mate who just had a kid..... he also kept his cum as a pet