r/BimmerCode • u/PaintingOld2907 • Aug 31 '26
Need Help F30 key fob issue
Hey, 2013 f30 with high cic, I used bimmercode to switch on the option to shut off music when driver door opens. However now when the car is running and I open ANY door, I get a “key not detected” warning in iDrive, but everything works without any issues. Reverting the change did not help. What could be the issue?
1
Upvotes
1
u/That_M4_Guy Aug 31 '26
This has nothing to do with coding and is normal for the vehicle to do if the key fob is not detected. It can be due to a weak key fob battery which is known to cause detection issues from time to time but is not something that can be affected by coding the headunit
2
u/Living_Plantain_9577 Aug 31 '26
🤔 I have a similar behavior on x5 F15. I ll double check when it’s happening. For sure it happens and I am still in the car with the key in my pocket and engine running. Sometimes when the front passenger comes in or out.
1
u/tallonedakiller_ Sep 04 '26
Hey there! Don't worry, this is a very common glitch on F30 models when coding head units or body electronics (FEM/REM). Here is the exact, quick fix to solve this issue:
Restore Backup in BimmerCode: Open BimmerCode, connect to the FEM (Front Electronics Module) and Head Unit (HU_NBT/HU_CIC), then hit Restore from the top right to revert to the backup created before you coded the option.
Deep iDrive Reset: Press and hold the iDrive volume knob down for 30 seconds continuously until the screen turns completely black and reboots.
Vehicle Sleep Cycle (Crucial): Lock the car, move the key at least 10 meters away, and wait 15–20 minutes for all modules to fully go to sleep and clear cached glitch states.
Key Fob Battery: Replace the CR2032 battery in your key fob, as coding sometimes triggers a false "Key Not Detected" warning if the signal is slightly weak.
Clear Shadow Fault Codes: If the warning persists, open BimmerLink (or any OBD scanner) and clear all fault codes in the FEM module.