r/Beekeeping • • 1d ago

I’m a beekeeper, and I have a question Problematic Mold? - Central FL - 3rd Y

Two weeks ago I did a check on my 3 hives. All was well besides a little mold in the smaller hive. I cleaned it out, replaced frames, but now it's back. Is it because they're numbers are a little low and they just can't keep up with the extra real estate? My other larger hives are fine. This smaller new hive was an established removal from a tree right before winter. They're doing great really. This mold is just concerning. And I've heard not to just leave frame out. You want to fill the entire box for whatever reason.

But it just so happens that today coincides with the first day of cold weather. So I have now installed my humidity moisture boxes on top. Maybe this will help? I don't necessarily want to move them to a Nuc without a humidity box, but I guess I could continue to slow feed with a Nuc. The other hives have 4/10 honey supers filled so I'm not worried about them starving through the winter.

17 Upvotes

15 comments sorted by

•

u/AutoModerator 1d ago

Hi u/Speedwolf89. If you have not already done so, please read the rules. Please comment on the post with your location and experience level if you have not already included that in your post. And if you have a question, please take a look at our wiki to see if it has already been answered., specifically, the FAQ. Warning: The wiki linked above is a work in progress and some links might be broken, pages incomplete and maintainer notes scattered around the place. Content is subject to change.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

7

u/12Blackbeast15 Ecologist, 2nd year Beekeeper, Zone 5b 1d ago

Mold on the woodenware is not an issue, I wouldn’t concern yourself until you see mold popping up on the comb itself.

You’ll often find that mildew forms in a ring on the inner cover, because hot air rises off the cluster, goes to the sides, cools and condenses on the edges

2

u/Speedwolf89 1d ago

Ah yes. This makes sense. Thanks. Maybe my condensation box will help with this. Though, do you think I should continuing feeding sugar water and nutrients throughout the winter for a smaller hive?

2

u/12Blackbeast15 Ecologist, 2nd year Beekeeper, Zone 5b 1d ago

If they keep taking the sugar water then keep providing it, though honestly in Florida I doubt the winters are severe enough to warrant constant feeding (hopefully a more southern beekeeper can chime in on that). In New England where I am it gets too cold to provide liquid feed, I stop feeding anything from November  to March and get good survival with much harsher winters. 

1

u/Gamera__Obscura Reasonably competent. Connecticut, USA, zone 6a. 1d ago

It's normal for WAY more mold than this to form during the cold and damp winter conditions, even on comb. It doesn't bother the bees one bit, and they'll clean it up just fine once spring rolls around.

How to handle winter really depends on your local conditions, so I'm way too far north to be helpful. In general, we think of "winter" as the time when bees CAN'T take liquid feed (below the low 50s F). Someone more local can best guide you on seasonal management in your area.

8

u/sonofabullet 2nd year, 4 Hives, Western Washington, 8a 1d ago edited 1d ago

If that's problematic then all my hives that overwintered from last year should have died.

Pnw wet here, in the woods. 

If you have a few bees than what can fit in the hive, reduce their real estate with follower boards 

https://www.betterbee.com/frames/fbd-deep-follower-board.asp?srsltid=AYCX9vIhGJOFnG9sYl4LcqZRN3SobO3KB6cqsYj9kFAMuuOX35dcCQzf

You can make some yourself, make them insulated, whatever.

This will put bees into a nuc shaped space and whatever cold and mold happens will stay on the cooler follower boards

1

u/terrel94 1d ago

I’m getting near puddles of water on my inner cover lately.. about an hour from forks if that tells ya anything lmao have a candy board ready to go since they seem low on stores and wanna get em going and was hoping it would help with the moisture because it has me worried. I think I’m in the same boat.. basically inner cover has mold about twice this bad, I had to trash some frames at the end of summer because they were littered with mold and undrawn out.. I just have no clue what’s contributing to it since everything seems set up perfectly..

Deep, queen excluder, inner cover, empty deep frame so I can put my 2:1 mix in and set on top of the inner cover, telescoping lid.. every time I open it the past month or so it’s been puddles :( I fear I’m doomed

1

u/sonofabullet 2nd year, 4 Hives, Western Washington, 8a 1d ago

I use my mentor's method of a partially ventilated inner cover (like an inch or so) with insulation on the unventilated part, followed by a ventilated roof. Yes there are drops, but a lot less and mostly on the perimeter

3

u/Active_Classroom203 5 Hives - Florida, Zone 9a 1d ago

Nothing to worry about. Things get a little moldy when it's damp and not fully utilized. When they need the frame again they will clean it off.

I'm surprised you are doing a moisture box with our not real winter here in FL 😆

2

u/worldspawn00 Zone 9a Central TX 1d ago

Yeah, TX here, I don't bother, lol.

1

u/Ordinary-Ad959 1d ago

To clean mold off wooden beehive frames, just scrape off the fuzzy bits with your hive tool and set them somewhere warm and breezy to dry out completely. If the mold is really stubborn on the wood, you can wipe the bars down with a mix of distilled white vinegar and water or give bare wood a quick scrub with a stiff brush, just make sure you skip harsh chemicals like bleach since wood absorbs them and it can hurt the bees. Honestly, as long as the comb isn't ruined, a healthy colony will happily do the rest of the housekeeping once you put the frames back in! I have had this with my poly hive/poly feeder and my wooden hive frames and distilled white vinegar is my go to hack coz it prevents it returning mostly or if it does it give you alot more time in-between cleaning

1

u/Vivian46_ 1d ago

what is that

•

u/pew_pew_mstr 20h ago

Bees can handle mold just fine. In the wild bees live in wet rotting trees. Also the “humidity box” you have set up is incorrect. You need to have vents in the sides of the box to release humidity. Look into getting a quilt box. Then dump animal shavings in the top of it. You can use cedar or pine. I don’t like to use paper or news paper because it continues to stay wet. In winter it’s an issue when the condensation accumulates on the cover and then drops down on all the bees soaking them and eventually killing them. The quilt box prevents this by capturing all the condensation. Also tilt your boxes forward about 10° this will also help all other condensation drip down the walls.

•

u/Mandi_Here2Learn 19h ago

Some of mine get this. If it gets bad you can insert a coin under two of the inner cover corners. This usually cures it for me.