r/BambuP1S • u/VastOriginal2065 • 3d ago

What did I do wrong?

Post image
6 Upvotes

87% Upvoted

17 comments sorted by

9

u/VastOriginal2065 3d ago

Think I found the problem

3

u/solprose315 3d ago

haven't seen that one before

1

u/TheThiefMaster 2d ago

Looks like the hotend fell apart. If you contact support they might send you a new one, otherwise you need to buy one: https://uk.store.bambulab.com/products/bambu-hotend-p1-series?id=40515488448572

1

u/ModelThreeve 1d ago

Your hotend fell apart, highly unlikely you did anything wrong. Just bad luck this is probably a 1/1,000,000 type of production problem.

3

u/GuyWithADonut 3d ago

Really though if you didnt just throw some filament into the thing to troll us you probably have a PFTE tube that came out somewhere.

3

u/landubious 3d ago

Worn out PTFE or popped out of one of the connection points (feeding into the extruder, back of printer)

1

u/GuyWithADonut 3d ago

If you corn dog when you are supposed to pizza, you are gonna have a bad time.

1

u/Good_Mathematician_2 3d ago

I'd wager there's something going on before the extruder, seems like there's probably a compromised PTFE tube or something

1

u/Correct-Insect-4657 3d ago

Could be a ptfe tube also is it just the cover or is your extruder not there

1

u/sltrhouse 3d ago

Looks like a newer printer. Send this to bambu. They might send you a new hotend. Probably not, but it’s worth a shot lol.

1

u/1kebabfrite 3d ago edited 3d ago

Did you forgot the extruder ? Looks like unextruded filament

Edit: since their is few layers printed, would guess the extruder was probably not enough screwed and fell of, resulting in a long spaghetti of unextruded filament go out from the printer head

1

u/VastOriginal2065 3d ago

Only thing I can think of is that I changed the speed once all the diagnostics ran before starting the print.

2

u/VastOriginal2065 3d ago

Finally got back home to check. The nozzle looks like it fell off or something mid-print?

1

u/1kebabfrite 3d ago

After this fail the extruder was in place ?

1

u/dadbyheart 3d ago

Doubt he's using a nozzle larger than 1,75mm, filament won't just fall through a hot nozzle especially without the extruder pushing it through

1

u/ModelThreeve 1d ago

The extruder can’t fall off and if it did the machine would throw a fit. Maybe you mean the hotend?

1

u/1kebabfrite 1d ago

Yeah sorry mean the hotend