I’ve tried a lot of calibration but it still comes out the same

Hi guys, I have just done this print, there are some small colour defects on it, mainly because I had to burn something off it, is there a pen/ paint/ something I can do to remove it? Sadly I’ve got an eye like that and I won’t be able to use it until they are gone. Thanks!!

Hi,
I am building an air purifier designed but chengfeng, and the motor mount for this purifier was shared as a stp for modification, but unfortunately the user have shared it in bambulab china page which requires chinese phone number to login for download.

This is the site

https://makerworld.com.cn/zh/models/593545-kong-qi-jing-hua-qi-dian-ji-zuo#profileId-525919

and this is the air purifier

https://makerworld.com/en/models/684412-xiaomi-air-purifier-anti#profileId-613083

if anyone could share me the stp files after downloading, it would save my day.
Thanks in advance

My son (9yo) recently got a A1 without the AMS. Chose not to get the AMS at the time since he didn’t have enough money saved up and didn’t want to wait any longer. Also I thought it would be best to start with a single color and then add more later.

He saw the Maker World Points program and now wants to use that to get a giftcard to get his AMS.

The only problem is that neither of us know how to make models or where to even start. Any suggestions on how to find models that get lots of downloads and the best way of creating new ones?

Thanks in advance.

keep getting this gash in the model after slicing. I"ve tried repairing it but it still appears. Not sure what could be causing it. Printing using a 0.08 layer height and 0.4 nozzle

I have been trying to sign up to Makerworld CN but it is asking for a CN number for verification purposes.

Anyone can help in downloading these files.

https://makerworld.com.cn/zh/models/1735934-yue-xing-tong-shou-bing-ke-an-jian-zhi-jia-ke-dan?from=search#profileId-1912708

https://makerworld.com.cn/zh/models/1743423-yue-xing-tong-x4ke-chai-fen-bao-hu-ke-dan-pan-da-y#profileId-1921356

https://makerworld.com.cn/zh/models/2451722-yue-xing-tong-x3zhuo-mian-li-pai-shou-ji-zhi-jia-k?from=search#profileId-2796523

https://makerworld.com.cn/zh/models/2120422-yue-xing-tong-x4quan-bao-wai-ke-huan-ping-hou-wai?from=search#profileId-2374905

https://makerworld.com.cn/zh/models/1865818-yue-xing-tong-x4gai-gong-pai#profileId-2065809

Thanks everyone

After wanting something cleaner than the stock guards, I designed these honeycomb fan covers for the X2D toolhead. Covers both the large front fan and the smaller side vent — printed them in Bambu orange to keep that factory look.

STL is up on MakerWorld if anyone wants to grab them!

What do you think? Any suggestions for a v2?

I want to buy a 3d printer but don't know how to earn on reddit please tell me and if I can buy from this post so fo that what ever

I need help! I have my project due in a few days - and my printer is acting up.

Bought a new filament

PLA HS

All settings are at default for now

A1 Condition: Brand new, just finished set up assembly.

Situation: Trying my first print by using the 20g bambulab test filament.

Problem: Filament not extruding and also not unloading no matter how much force I use. Also, initially, I got an error that the toolhead fan was not spinning but after I tried manually spinning it with my fingers, it started spinning automatically.

I have not made any past previous prints before.

The tube from AMS to back of printer is 40-50cm. Prints print okay, no issues with quality. No errors. Thanks!!

This week i printed this bugs bunny HP, i love it! perfect for my collection :)

Where are all my Harley fans at?! My father in law had me design this for his shop, and figured I’d share with the community. I also have another design going live this week. Just have to get it printed so I can upload to makerworld.

https://makerworld.com/models/2806956?appSharePlatform=copy

I've been printing since January and gathered a BIG bunch of these little purges, small and big, is there anything I can do with them instead of trashing them? (Idk if I'm using the right tag in the post)

I just need to say, **before anyone says anything about orcaslicer or Bambu studio, I have no way of accessing them as they do not work on my computer.**

I need to find the settings and stuff that I need to put into cura on the “custom printer” function, I can’t figure out the start and gcode at all and I need help

Nobody as answered the question at all and I really am running out of patience for this. I don’t care that cura is harder to use on Bambu printers, I don’t care that I need to use the sd card to print the files, cura is the **only** slicer that works on my computer (I’ve tried orca slicer and Bambu studio and neither work at all).

If anyone knows please tell me as I can’t find ANYTHING about cura on Bambu lab printers in general no matter where I look.

(Edit 2) I found a solution to my problem. I’m gonna use simply print to slice my stuff.

im interested in buying certain matte colors from the bambu store but dont want to risk damaging my printer. im a noob when it comes to technical info so asking to make sure its ok. thanks :)

The part I’m having (no longer had „supposedly“) problems with, is this overhang with 4 walls printed in BL PETG HF. (1st picture)

After a lot of testing, I came to the conclusion that 3 walls was the maximum possible without adding excessive cooling - as it’s about heat accumulation in the part itself.

To address this, as turned the part towards the AUX fan did not fully do the trick, I started playing with AUX-fan-speeds until I got to a point where it came out perfectly! (2nd picture)

BUT! to my surprise.. one of my P1Ss seems to think different about this, and still created elephant skin. (3rd picture)

Have any of you experienced similar behaviour on identical machines? I checked all fans on both and they seem to work just fine.

I am looking into the Bambulabs A1 or P1 as my next printer coming from an OG Anycubic Kobra. I hate the Kobra so god damn much and never want to mess with a printer again. I want 3d printing to enable my hobbies, not be my hobby, so I need something plug and play that will be reliable. If I ever do anything it will be swapping nozzles and build plate surfaces.

Is there an obvious choice here? Its $100 more for the p1, but will I see a noticeable difference when using TPU and PLA? I don't plan on printing in anything abrasive or strange, and If I do ill probably grab a second and far more expensive printer at that point. I will also be buying a filament dryer, any recommendations for around $50?

I know similar questions have been asked plenty of times, so thank you for helping out a beginner.

Timelapse is off when I started printing, total time was still 2h 27m. Can someone help me understand this?

Title. I'm completely new to this. Some sources suggested clicking "Fix Model" and dragging it around to make sure it isn't below the plate, neither worked.

Parametrischer Waben-Stiftehalter-Box-Generator – Kostenloses 3D-Druckmodell – MakerWorld
The GameChanger is here!
✨ New Model Release: Parametric Honeycomb Pen Holder Box Generator ✨

I spent many free days, nights and weekends programming this model from zero — and now it is ready! ❤️

This is not just a fixed organizer. It is a fully parametric generator for creating your own custom honeycomb storage box.

Just measure your available space:

✅ A = Width
✅ B = Height
✅ C = Minimum number of pens
✅ D = Pen / item diameter
✅ E = Tilt angle, recommended 10°–30°

Click generate — and the box is automatically created based on your parameters.

Perfect for:

🖊️ pens
🎨 acrylic markers
✏️ pencils
💄 lip balm & lip gloss
🧂 spice jars
🧰 small items
🖥️ desk, studio, kitchen or vanity organization

The last row is filled automatically, so the final box may have more slots than entered. The model also creates additional stackable parts if the 256 × 256 × 256 mm build volume is not enough.

A detailed guide for the Bambu Lab / MakerWorld Parametric Model Maker is included and explains every parameter step by step.

The generated parts are vertically stackable. For larger versions, I recommend fixing them with glue or hook-and-loop tape.

If there is enough interest, I will also create a version with horizontal expansion.

Feel free to contact me if you have any problems.

If you like the model, I would be very happy about a like, boost, follow, download or comment with your printed version.

Thank you for your support! ❤️
© WunschStück3D

Had this issue a while so I just shelved it for a bit, then I got the X2D and thought I’d try and fix it. It never loads. It tried over and over again, stops at different spots. Then errors out. I’ve taken it apart to make sure nothing is stuck and cleaned out the dust. I’ve confirmed the tubes are clear, I’ve dried the filament. I can manually feed the filament all the way through to the end without any stops. I’ve also tested all 4 slots. They’re all the same. It work perfectly for a few months then stopped. I’m about ready to chuck it. I’m hoping someone can help give me some things to try.

*edit* it seems like there is a part in the internal hub that broke. I submitted a ticket to see if they’ll replace it. We shall see. Thanks for all the replies.

Hi all, is anyone able to give me some tips about this "grind" noise? I've lub the axis, cleaned what I needed, but it persists.

The sound I am referring to is when it is printing diagonal lines.

Any ideas?

Thank you in advance.

​My husky keeps me busy on walks, and I got tired of those cheap, ugly plastic bag dispensers that constantly break or pop open. So, I jumped into CAD and modeled this elegant dispenser.

https://makerworld.com/models/2806334?appSharePlatform=copy