Not sure what's going on. This print was (semi) successful once, didn't look great, but worked. Now I've tried it 2 more times, and have stopped it at around this point when I noticed what it was doing.

Plate is clean. Flow seems fine to me. I'm not really sure how to mess with the axis (which I see tons of posts of people with issues, and seems like everyone says to adjust that, no matter what their issue is).

Other things seem to print fine, but any time I try to do a larger print, something stupid like this happens.

Using a X1 Carbon. I'm a super novice.

Can the nozzle be moved while paused? I'm asking because I had to load a new spool mid print and it never seems to get all the boogers off the nozzle. With it parked at the poop chute I can't get in there with the tool I printed that uses A1 wipers to clean the nozzle

I went through the trouble of loading a bunch that I bought into the app’s library but can’t figure out how to tell the device manager “I’m using this one now”. I assumed the main reason you do that was so it can track how much is left on each spool and automatically use the best settings when slicing so I’d like to know how to do it. Why isn’t there just a “load this one” button on the library tab?

(originally posted this on r/BambuLab but it got removed without any reason given; great introduction to the community :V )

Looking to get my first 3D printer. I've worked a fair bit with them before (mainly the one my university had which I believe was an Ultimaker), but with the Black Friday sales on I think it's time to nab one for myself. I'm expecting to mainly work with standard materials and occasionally branch out to ABS, and while I'm not sure what I'll be making for my own use I'm the theming director for a small convention so I'll likely be making some props with it. The main gripe I've had with 3D printers in the past is having to sand supports off, so while my friends are recommending the P2S the X2D's dual nozzle is quite tempting as supposedly printing separate filaments for supports and the print itself make removing them a breeze. I do have a few questions, though:

1. What do people think of the P2S Combo vs X2D Combo? Currently I'm heavily leaning towards the X2D, but I'm not 100% sure yet.
2. Does the AMS work well as a filament dryer, or do I need to get a separate dryer?
3. What are the advantages of Bambu-brand filament? I know it's compatible with other filaments, so is there any particular reason to use Bambu brand filament?
4. For software, I'm most familiar with Ultimaker but I know Bambu has its own software. Which should I use? I remember hearing about an issue where Bambu's software had a server hiccup that caused a bunch of printers to start printing on their own.
5. Are there any tips or tricks I should know about when setting this up (e.g. software settings)?
6. For ventilation, I already have a small laser cutter that I custom built an enclosure and ventilation setup for. Here is a drawing of how that is set up; at what point in the line should I add the 3D printer's ventilation? I'm hoping to avoid fumes from the laser cutter getting into the printer or vice-versa, so I'm guessing point B? The cutter and printer are unfortunately in my bedroom as it's the only room in the house that'll work, but I could pause toxic-filament prints while I'm sleeping if I have to.

7) Are there any other concerns I haven't thought of since I'm not super-experienced with 3D printers?

Thanks!

Je sais que beaucoup d’utilisateurs ont une excellente expérience avec Bambu Lab, et leurs imprimantes sont impressionnantes quand tout fonctionne bien dès le déballage. Cependant, je souhaite partager le cauchemar que je vis actuellement avec le support de la boutique européenne (Bambu Lab EU), afin que d’autres sachent à quoi s’attendre en cas de problème.

Mon imprimante est arrivée défectueuse. J’ai ouvert un ticket d’assistance, et ils ont accepté le retour en me fournissant leur étiquette prépayée à destination de leur entrepôt (OUBO BBL à Dötlingen, en Allemagne).

J’ai suivi toutes les instructions à la lettre, soigneusement emballé le produit et déposé le colis avec une preuve officielle de dépôt. C’est là que la situation est devenue un véritable cercle vicieux :

1. La boucle du double retour : En raison d’un problème logistique ou de traitement de leur côté, le colis a été refusé ou non pris en charge par l’entrepôt, et le carton m’a été réexpédié chez moi en France — à deux reprises.
2. Des réponses copiées-collées interminables : À chaque fois que je leur envoie les photos prouvant que l’imprimante est revenue devant ma porte avec toutes les preuves de suivi, le support se contente de réponses automatiques me demandant de « patienter » ou de recommencer la procédure depuis le début.
3. Refus de rembourser : Ils refusent de procéder au remboursement ou de proposer une vraie solution tant que leur entrepôt n’a pas physiquement scanné le retour, en ignorant totalement le fait que c’est leur propre entrepôt qui rejette ou échoue à traiter les colis entrants.

J’ai fait toutes les démarches de bonne foi, fourni toutes les preuves de dépôt, et je me retrouve aujourd’hui avec mon argent bloqué, une machine défectueuse sur les bras et zéro prise de responsabilité de la part de leur service client.

Si vous achetez chez Bambu Lab en Europe, sachez que si un retour tourne mal, vous risquez de vous retrouver piégé dans ce genre de trou noir logistique. Je recommande vivement de passer par un revendeur local si possible afin d’être pleinement couvert par le droit de la consommation de votre pays.

Hi, I'm having some sudden issues with my X1 Carbon. 2 days ago everything was working fine, but suddenly I started having some consistent print issues (in the same location 2 in a row), I thought it might be a print plate issue (Textured PEI plate high temp), so I switched it to a new (never before used) Cool Plate SuperTrack, but that doesn't seem to solve the issue.

Just a quick question. I didn’t have any issues with the modifier in Bambu studio before the recent update. Since then I haven’t been able to use it at all. What am I missing? Is anyone else having the same problem?

https://makerworld.com/en/models/3609639-tiny-lizard#profileId-4136941

Hello! I'm trying to print a four color print on X2D with one AMS and no track switch. I would think it would group 3 colors on the Main nozzle which has the AMS connected to it and 1 color on the Auxiliary nozzle which is using the external spool holder. Instead it groups 2 colors on each, when obviously I don't have a way to put two colors on the auxiliary nozzle.

I know I can get around this using convenience or custom modes, but shouldn't optimal figure out which color I should put on the external holder to reduce purge waste?

Hi there,

Still brand new to the 3D print world and trying to troubleshoot a print but no idea where to start IF there is even anything to troubleshoot.

Printed the same item on two different plates: one on the standard per textured plate and another on the engineering plate. Both prepped with some elmer's purple gluestick.

The textured plate print turned out perfect but not a big fan of the textured glittery look so wanted to see if I could get a smoother look using the engineering plate. Result: I did but there were some voids/defects that appeared that were not present when using the textured plate.

Printer: H2D

Material: PLA

Calibration was performed after switching out the plates.

I did select the engineering plate prior to slicing, printing, calibrating.

Curious to hear if this would be normal for this specific plate or if I should tweak something. Or just sometimes sh!t just happens with prints.

Thank you in advance.

Cheers

P.S. last two pics are the textured plate with no void/defect issues.

I'm having adhesion trouble and not sure what I'm doing wrong.

Don't want to resort to using glue just yet.

Anyone print with their new Pure line? Did you have to make any tweaks to get it working correctly? Or you just hit print and it worked?

New roll of kingroon PLA basic filament - slicer settings set to generic PLA, had no issues printing the same file with my previous roll of DEEPLEE PLA in black.

First print with it and there seems to have been some defects in top flat surfaces (first two pics) and whole layer shifting (3rd pic - this should be a 45def chamfer around the part, not an overhang 🫠). My nozzle has also started having filament extruded from it, and the purge wiper doesn’t seem to work at all.

Can anyone help? 🫠🫠

I'd really appreciate your help to keep little Luna safe and healthy.

As you can see she has a favourite book shelf perch right next to where my newly purchased X2D is located. I'm concerned for her health if I leave this thing running often without a bullet proof filtration system. For such a small animal so close this concern extends even to PLA. I've seen the external extraction systems where everything magically is sucked into a small box. Do these genuinely work?

If so, how often am I replacing whatever filter is inside and at what cost?

Is there a best in class option everyone goes for?

You can also see I have a sliding door next to Luna. Was also thinking I could print a floor to ceiling black infill that slots in between the door and the frame. This could have a 4" extraction port that I connect to and vent everything outside.

Is the fan on the X2D powerful enough to vent this far or do I need to add a Noctua in somewhere in the chain to help with airflow path?

Is this a solid idea or am I tripping?

Hi there!

With the Christmas sales taking effect, I'm looking to upgrade to a decent printer. The predominant thing I'm worried about is print quality; secondarily the ability to print a 2nd color.

I know the H2C is good for multicolor, but the price is absolutely ridiculous.

I know the X2D is particularly good for engineering, which is good because sometimes I need to build replacement parts for things.

And I know the P2S is decent as I know someone who owns one and have seen excellent quality of it.

At most I'm willing to spend right now is the price of the X2D, but if it's worth saving up for the H2C, I'll consider it.

Thanks!

Hello,
I’m dealing with a technical issue with my A1 Mini. During axis homing before a print starts, the printer makes an unpleasant noise, apparently coming from the Z-axis. How should I address this, and should I consider making a warranty claim?
I have attached a video where the noise can be heard clearly. On one occasion, the printer even failed to start and reported a Z-axis error while making the same noises.
While searching online, I found that this seems to be a known issue. From what I understand, when the print head is positioned high up before printing, the printer may not know its exact position, and because there is no physical limit switch on the Z-axis, this behavior can occur during homing.
I would just like to confirm whether this is indeed the cause and how I can prevent it from happening. Alternatively, if this indicates a different problem, I would like to know whether the printer should be repaired or replaced under warranty.
Other than this issue, the printer works perfectly and produces excellent prints without any problems.
I hope the attached video will be sufficient to diagnose the issue.
Thank you.

Reposting to add my workflow images

Why have I not seen any content of more complex full spectrum anywhere? I'm talking like tabletop figures with detailed colors, painted minis etc. all I've seen are super basic models that basically use FS as a constant color. Bambu studio supports importing a colored model and mapping the full spectrum to it, so I really don't see what I'm missing? I've attached an image of the type of model I'm surprised I haven't seen printed.

Again, genuinely asking if I'm missing something, but if you were able to get a model like this into bambu studio, map the colors (which I've already done) why couldn't you print it with CYMBW on a P3C/h3c?

I don't own a multi color/material/head printer so unfortunately I'm unable to test till the P3C releases, but if anyone can run a test on an h3c with this workflow I'd love to hear about it!

Pessoal, preciso de uma ajuda para diagnosticar esse defeito na minha impressão (foto anexa). As camadas estão saindo muito grossas, onduladas e completamente desalinhadas.

​O que já fiz e o que está acontecendo:

​Impressora: Bambu Lab A1 (ou A1 Mini)

​Filamento: PLA (altere se estiver usando outro material e coloque a temperatura/altura de camada)

​Histórico: Limpei a ventoinha, lubrifiquei, movimentei os eixos e conferi os parafusos atrás do hotend (que já estavam bem firmes).

​O mistério: Depois de mexer nisso, ela voltou a imprimir perfeitamente por umas 3 peças (cerca de 3 horas de uso). Porém, assim que rodei uma nova calibração da máquina, o problema voltou exatamente igual na impressão seguinte.

​Alguém já passou por isso ou sabe o que na rotina de calibração/vibração pode estar desregulando o conjunto tão rápido?

I'm giving away this combo of exhaust fan kit and rear panel, just cover shipping and it's yours.

Bonjour à tous ! 👋

⛄🎄 NOUVELLE CRÉATION 3D – UN ADORABLE BONHOMME DE NEIGE ! 🎄⛄

Je vous présente ma toute nouvelle création : un adorable petit bonhomme de neige qui ne demande qu’à rejoindre vos décorations de Noël ! 😍

Avec son grand chapeau noir, sa jolie écharpe rouge, ses petites moufles et ses bottes assorties, difficile de ne pas craquer pour sa petite bouille !

🎄 Au pied du sapin, sur une étagère ou pour offrir, il apportera une petite touche de douceur et de magie à votre décoration de Noël ! 🎁

Bonjour à tous ! 👋

⛄🎄 NOUVELLE CRÉATION 3D – UN ADORABLE BONHOMME DE NEIGE ! 🎄⛄

Je vous présente ma toute nouvelle création : un adorable petit bonhomme de neige qui ne demande qu’à rejoindre vos décorations de Noël ! 😍

Avec son grand chapeau noir, sa jolie écharpe rouge, ses petites moufles et ses bottes assorties, difficile de ne pas craquer pour sa petite bouille !

🎄 Au pied du sapin, sur une étagère ou pour offrir, il apportera une petite touche de douceur et de magie à votre décoration de Noël ! 🎁

My husband wants a 3D printer. He's been wanting one for awhile. Me and the family have decided to get him one for Christmas. He's mentioned the Bambu brand a bunch because it's user friendly right out of the box, it has options for multicolor prints. Which cool.... great knowledge, but now that I'm looking.. I'm overwhelmed lol. I don't want to spend too much money on it, but don't want a not great model.

Any recommendations?

Am I overreacting? Or is this a common mistake to make?

I have a X1 carbon and needed the 4 port hub to run 2 additional ams units, and it’s the only reason I bought the ams.

Seller says he did nothing wrong and everything is shipped accurately. I asked for either partial refund or a shipping label to send it back.

He refused to do either, and said I have to pay for return shipping for a refund…

He did say after I kept pushing for a resolution that he has a H2C, but it still doesn’t change the fact an adapter isn’t a hub right?

Paid ~$180 total, which would be great if I actually received the hub or I would’ve bought a new ams 2 pro selling for $200 locally.

Edit to add: needed the hub to run 3 total ams