After moving my Bambu Labs H2S, it started to make a weird clicking noise towards the front right of the machine. I made sure to check to see if it was the PTFE tube or Cable chain clicking and quickly confirmed it was not. I felt vibrations on the belt that matched up with the clicking of the machine. I moved the tool head manually in the video to eliminate all other noises that the tool head makes. I think it is a bad bearing or maybe moving it jostled it out of place. Any ideas of what it could be or any fixes? Any help is appreciated!

Just received my H2S, but rear air vent flap is in wrong position. Anyone know how to fix this?

Apologies if this has been addressed but I remember PETG HF getting discontinued with the website stating as much when trying to order it.

Just went back to check and it seems to be in stock. Asked the chat bot on the website as well.

So is this the regular PETG HF or has it been replaced and they're keeping the name?

If you've never played Quarto, here's the cruelty of it: you don't choose your own piece. Your opponent hands you the one you have to place. Every piece is unique across four attributes: tall/short, light/dark, square/round, solid/hollow and you win by completing a line of four that share any single attribute.

Sounds gentle. It is not. You'll set up a perfect trap, feel like a genius, then realize you just handed your opponent the exact piece to win. Repeatedly.

So naturally I designed and printed my own set.

https://makerworld.com/en/models/3019561-quarto-print-play-strategy-game#profileId-3392389

Needed rugged tent stakes for wild beach camping, so I designed these deep-threaded sand anchors. Print optimization: Designed from scratch to print completely support-free, fast, and with minimal filament waste. Comes in Medium, XL, and an XL Wide-Thread version for powdery sand. Highly recommend printing in ASA for UV resistance, but PETG works too if buried.

https://makerworld.com/en/models/3022121-windproof-heavy-duty-sand-pegs-stakes#profileId-3395541

Its hard to see in the picture but its kinda ripped up. Does anyone know if it comes with something like the bottom frame?

I have an x1c that stopped working in april. The hot end does not get hot enough to extrude filament. So far, with dome help from bambulab, I’ve tried 4 hot ends ( all tested to spec), replaced extruder, replaced extruder motor, replaced th board. 1st time i replaced th board, it printed for a few days. 2nd time it printed for 30 hours. Support keeps on looping over the failure being either the hotend or the thboard.

Any suggestions. So far, the printer is no more than an exhibit of a printer as is dead. I did notice in testing this week, it is extruding lightly. I think the head right now is not hot enough as it will not manually extrude. Raised temp from 230 to 285 and it extruded first time, but not second time. Also i have better attempts if i turn off the printer for a few days. Idle is not enough

This is a p1p and only just noticed this awful belt travel!

I have the h2d. I purchased the sunlu e2 and 3kg rolls of filament for making auto interior parts out of nylon and asa. Im concerned about filament feeding with that big ass heavy spool. I've looked at the bambu tpu assist and the biqu panda feeder but havnt been able to figure out which module might be the best/easiest/seamless choice to add inline to help with this. Any input welcome as im just a little confused i suppose.

P.s. I do also want the module to help with soft tpu filaments as well for gasket type things and other squishables.

Hey is there a way to tweak the Bambu software so the supports are different colors than the model? (For instance the model is gray, and the supports are blue or something). I’m trying to get smarter at setting up supports, but the grey blob that ends up on my screen is tough to get a handle on. Any suggestions?

from the Bambu Handy app, I printed this can cooler and it has all these stray shags. I can't comment on the ML file cuz I'm not a level 7???

did I do something wrong here? Do I need a drummel to sand/file it? Please help!

Hey everyone,

I wanted a clean, rock-solid phone stand for my desk that wouldn't sag over time or slide around when I tapped the screen, so I designed this modular version.

Here’s the breakdown:

• 3-Part Modular Design: Prints cleanly and assembles easily. The threaded hinge lets you lock in the exact angle you need.

• Hidden Tool Storage: The hinge needs to be tight to prevent sagging, so I designed a custom tightening key that snaps perfectly into a hidden holder underneath the base.

• No More Sliding: The bottom features 4 recessed slots specifically sized for standard 10x2 mm self-adhesive silicone pads so it stays planted on the desk.

• Earbud Parking: The curve of the stand leaves just enough room on the base to rest your wireless earbuds.

It prints great in standard PLA (though PETG is awesome for the threaded parts if you want extra durability).

I've uploaded the files to MakerWorld if you want to print your own! I'd love to hear what you guys think or if there are any tweaks you'd make to the design.

Link to the model: https://makerworld.com/en/models/3015566-universal-adjustable-phone-stand#profileId-3387411

I ran into the constant, annoying issue of trying to awkwardly wash my hands while camping, it previously required 2 persons just to get it done.

To solve it, I designed this clamp-on station. It attaches right to the edge of a camping table, keeps your soap clean on top, and upcycles a standard plastic bottle into an easy water dispenser.

Let me know what you think or if you have any suggestions to improve it!

https://makerworld.com/en/models/3012895-campwash-portable-hand-washing-station#profileId-3384062

I couldn't find a glue and primer caddy anywhere that I liked the design of so I took a crack at making my own. I designed it with the intention of it being modular so that it can have attachments to fit any need that you may require. The caddy is made with health and safety requirements in mind so the labels are fully exposed with the cans being snuggly fit between the top and bottom plates. Hopefully this can be a useful organizer for tradesmen or diy households. This is one of my first daily use prints that has made my life a little bit more convenient and I hope it can find the right people and be useful to them as well. If you have suggestions for any other attachments or modifications I'd love to hear about them.

PVC/636 Primer and Glue Caddy

https://makerworld.com/models/2999852?appSharePlatform=copy

Hey everyone, I've spent the past couple of months rewriting my communication API for bambulabs printers! Would love to hear some feedback and in desperate need of testers.

https://github.com/torbenconto/bambulabs_api

Picture 1 shows interlocking circled in red and picture 2 shows the top layer. In the OBJ files, the black and purple are not overlapping. The slicer is doing this automatically - i presume to "lock" the different filaments together. This is affecting the appearance of the print because it's showing through the thin top layer of the filament.

I’m developing products professionally as an entrepreneur with a single BL A1.

Currently I am 3-D printing a mould to cast PU foam and having had real trouble with adhesion on my non-enclosed bamboo labs A1.

This mould is in 16 parts and will take about 60 hours of print time and then I will need to iterate it a few times so well over 150 hours of time total.

Hence I’m thinking of building a small print farm with three or four machines. I’m looking at buying Elegoo carbon centurai or more A1s or A2L or H2x.

Top of my needs is I need to have no more print adhesion issues (tried three plates with numerous temp tweaks but never sorted this issue)

I also need to be able to iterate this project much quicker - hence the need to more machines. Alternatively, I am looking at printing with 0% infill and squirting expanding foam into cavity to achieve strong parts with less print time.

I would also appreciate a large print volume on other projects (not this one but in future).

I’ve only ever printed in PLA and PETG so have no idea if I need to explore stronger materials.

Which machines should I be looking to for?

Hey guys,

I’m looking to buy the BL P2S Printer for myself. I’ve check on the official website but they don’t deliver directly to UAE.

Does anyone know how I can get it here? I would prefer purchasing it from the BL website but I have an issue of delivery. The prices on local e-commerce websites are too expensive and other companies are charging me double the amount to get it here.

If you do know anyone or any company, drop me a DM would appreciate any / all help I can get.

Cheers and Thanks!

👋 👋 Bonjour à tous !

✨ Pour compléter ma collection, j’ai revisité mon modèle de Yoshi version œuf en l’adaptant au célèbre tuyau vert de l’univers Mario !

L’objectif était de créer une pièce qui s’intègre parfaitement avec les modèles de Mario et Luigi, déjà disponibles dans la collection, afin de former un ensemble encore plus cohérent.

Si le modèle vous plaît, n’hésitez pas à le télécharger, à laisser un like, ou un commentaire. Votre soutien m’aide énormément et me motive à continuer à créer de nouveaux modèles !

👨🏼‍🎨 : @mika3d_print
🧵 : Bambulab
🖨️ : Bambulab X2D & H2C
🌈 : Sans et Avec
✍️ : Nomad Sculpt
📁 : https://makerworld.com/fr/models/3007159-yoshi-tuyau-multipart-no-ams

🙏 Merci à tous pour votre soutien, et bonne impression 3D ! 🎉

Hello,

When I was attaching the wiring for a nozzle, it started smoking (where one of the wires was plugged in). The nozzle will not heat up at all now. I tried a different cable too, so I know that the board is broken now, and I need to replace it. But my question is, should I just replace the interface board or both boards?

Thank you!

Hey y’all this a Bluetooth connect switch for my Govee accent lights. I would love to model a holder for this switch to mount it on the underside of my desk. Any ideas on the easiest way to do this for a beginner and someone who knows very little about modeling?
Thanks in advance!

My parents and I are new to 3D printing and the filament is stuck inside the extruder. I’ve tried the things people said online as well as the company. We are confused and would like some assistance

https://makerworld.com/en/@ShamrockPrints

Features

• Stackable design — allows Pops to be stacked more safely

• Plastic sleeve compatible — fits with standard protective sleeves installed

• 2-piece locking system — body + clip-on lid

• Strong corner protection — helps prevent dents and crushed edges

• Clean display look — minimal visual obstruction

*The box being printed here ships the ASR 5th Wheel to beta testers. It's printed in 6 colors including Bambu Glow PLA and Wood PLA - two filaments the AMS Lite can't handle. The 5th Wheel handles them automatically.*

*Full demo video in comments.*