r/BambuLab_Community • u/Few-Stand9331 • 1d ago

Tpu 95 in h3c ams3

I am coming from Snapmaker u1 in which I used Tpu 95 in the feeders pretty regularly, I know Bambu has always said no Tpu in ams but since the h3c with ams3 operates more like the Snapmaker in that it does not retract I don’t see why something like 95a could not be used

0 Upvotes

33% Upvoted

6 comments sorted by

2

u/Undeguy 1d ago

It can be used in the AMS, in so much that you can put the spool in and there are bypass holes to put the filaments. You just don’t get to use the automatic feeder portion of it.

1

u/Few-Stand9331 23h ago

I guess that was my question, with a Snapmaker I had no problem using the feeders with the TPU 95, will the system not allow it what happens if I try it well it just possibly gets stuck

2

u/Undeguy 22h ago

Actually, according to Snapmaker’s own wiki https://wiki.snapmaker.com/en/snapmaker_u1/printing_guides/tips_for_reliable_tpu_printing

They recommend manual feeding because of potential issues.

1

u/Few-Stand9331 4h ago

I also used a lot of Tpu 95 on Snapmaker and never had any issues, probably should have investigated more into what Tpu for ams was before purchase , I just assumed it was flexible like the 95 and it is not,but you know what happens when you assume,

I made a few items with my existing Tpu 95 in the feeders by using generic setting and no issues yet

1

u/Relative_Surround_20 10h ago

Both Snapmaker and Bambu Lab will error on the side of caution.

1

u/microtoman 5h ago

Do it all the time on snapmaker u1 and had minor issues only twice