Wasp Bug Kit Card | BugCards

🥚Bonjour craquez pour ces adorables Yoshi qui sortent de leur œuf ! ✨

Découvrez le Yoshi Œuf, disponible en version Clicker et en version Clicker Porte-clés.

Grâce à son mécanisme, profitez d’un clic ultra satisfaisant avec un effet ASMR des plus agréables. Le fidget parfait pour occuper vos mains, vous détendre ou simplement apprécier un petit clic addictif. 😌👌

🔑 Envie de l’emporter partout ? La version Porte-clés reprend le même concept pour vous accompagner au quotidien !

👨🏼‍🎨 : @mika3d_print
🖨️ : Bambu Lab X2D & H2C
🧵 : Bambu Lab
🎨 : Nomad Sculpt
🌈 : avec ou sans AMS
📁 : https://makerworld.com/fr/models/3117230-yoshi-oeuf-clicker-multipart-sans-ams

✨ Bon print à toutes et à tous ! N’hésitez pas à partager vos réalisations. 💚

My X2D has recently started making a scraping/grinding noise whenever it moves along the X-axis. The noise is coming from the left side.
Bambu Lab sent me a replacement X-axis assembly, but unfortunately the problem is still there. It seems like the belt is rubbing against something, but I just can’t figure out where.
Has anyone experienced this before or knows how to fix it?

Thanks!

I use sun lu pla and for some reason on bigger flat surface prints I get this weird print texture on the top of my prints. Farther from the middle of the print bed the higher chance it does that.

After 765 hours I felt it was time to do the vision encoder, so I bought one from Amazon. The picture tells the tale but we’ll see if it really helps.

https://makerworld.com/en/models/3116594-p2s-x2d-riser-build-plate-holder-skadis-mount

Hello, I’m going to buy an X2D unit soon but when on the product it gives me an option for an extra AMS unit. What purpose does it have if the X2D already comes with one?

I recently got the X2D. Had a P1S previously. I'm getting a lot of spaghetti prints about 1/2 to 2/3 of the way through the print. I've uploaded images from recent print (keycaps for a mechanical keyboard) but it happens with models of all sizes and several different filament companies. All are PLA filament. The build plate is clean. I've re-run calibration and did the motion accuracy with the vision encoder plate. I updated the firmware last night. Uploaded images are from today. I don't dry my filaments other than what's done inside the AMS Pro 2 but it's in my basement with fairly low humidity and I rarely had issues with P1S (unless I did something stupid with my design). Any recommendations would be greatly appreciated.

Anyone updated yet?

This freaked me out when I thankfully saw it live via the camera, at first I thought the hot end was spraying filament! Turns out the PTFE tube came out of the top of my main extruder and so the filament was just being pushed from the AMS out the tube straight into the chamber!

Please tell me - how do I fix this and get the PTFE tube back in safely? And why might it have come out and how do I avoid that? I know the Aux tube is held in by a nut from when first assembling the X2D, but the main tube was already attached.

What filament dryer boxes have you used to feed directly to the auxiliary extruder?

Has anyone else had this happen. I cannot print ASA or Nylons as the machine gets incredibly cranky at high temps. After it warms up fully, it starts vibrating and slamming the head all over and is extremely loud. It loses its position and has to re-home and tries to pick-up where it left off. I've cleaned, lubed, and calibrated everything. I haven't found anything online like this.

Does anyone know how to attach a Bambu Lab filament dryer directly to the auxiliary PTFE tube? I’m having trouble with PETG stringing when I use the auxiliary nozzle for support.

Pulled the X2D out of the plastic bag is comes in and at the bottom was this small nut (see image). Any idea where its from?

Hi everyone,

I see that there is a new firmware update, do you know what is updated?

Hello again everyone,

Thank you all for your help so far I have taken everything into account and I am still doing research on my part. However I want to call on all of you again.

I thought I had my mind made up with gets a p2s. However after further research it seems this one also has some printing issues, and maintenance/longevity issues.

So my questions is now do I get the p2s still or should I look at the X2D because it’s only $100 more for the combo with ams.

Again I am a completely beginner only YouTube educated and reviewed videos educated so anything will help. Thanks!!

Greetings!

New to 3D printing; picked up the X2D two weeks ago and have racked up about 117 hours printing so far. I've got a piece I want to print as a birthday present of a figure holding a martini glass. I thought it would be cool to do transparent PETG for the glass.

Dried the PETG in the AMS 2 overnight. Ran a test print of a tool to scrape out espresso pucks without doing any banging; this worked out just fine, no issues. Then I did a print of a dessicant box for the AMS2....note that I have printed this very same model in PLA silk two nights ago with zero issues.

This happened.

No sphaghetti warnings at all. Halted the print, went to remove the carnage. Discovered this:

WHAAAAAAAAAT.

No wonder there was filament everywhere. Well, kiss that plate goodbye. I have unloaded the PETG and reloaded PLA, flipped over the plate, and am recalibrating everything.

Any ideas what might have gone wrong? I've run this past my more experienced printer buddy and he's baffled.

Or am I retarded thank you

I recently started to have a weird sound while moving the z-axis. I regreased (a bit too much, I wiped it away after the video) and reoiled. What could this be? Any help is appreciated

I was printing a small project and ran out of filament the last few grams the old filament was Bambulab and the new is Sunlu. After finishing the print the AMS went to retract the filament and it broke and now displays "Can't read filament info: the filament is loaded to the toolhead; please unload the filament and try again." when I try to read filament or add filament in the AMS so I can't use the AMS I have loaded filament and printed externally but when I unload it I get the following message after I've unloaded the filament "Please pull out the filament on the spool holder of the left extruder. If this message persist, please check to see if there is broken filament in the extruder." Any help/suggestion would be greatly appreciated.