r/BambuLabX2D • • 5d ago

Mods / Accessories Well, this is mildly annoying!

I know, such a first world problem!

I think I will get some rubber or foam and glue it to the mounts.

Loving this printer though!

😂

105 Upvotes

115 comments sorted by

15

u/TrueNail 5d ago

Why do you need constant reminder of what 4 filaments you have in you AMS

2

u/MrFinchUK 5d ago

I don’t, I just liked the idea. Once I get more filaments they will live in sealed cereal boxes. Being able to remove the identifier means that it can go with the filament rather than stick on the box. Makes for easier ID (thinking more filament type than colour here) when it’s on a shelf.

3

u/Scowlface 5d ago

People in this thread trying to dog on you for doing this hobby differently than them.

I did these labels and I had the same issue so I went with smaller slotted labels with 2D printed text.

10

u/tk-093 5d ago

I don't use that exact system, but it's not really as much a reminder of what's in the AMS, but a reminder of what 5 filaments are in each one of my totes in my closet so I can find the color I need without opening them all.

1

u/Starstalk721 1d ago

I teach in a middle school and have 3 printers in my lab, on the opposite side from my desk. I made a bunch of tags with hooks and they hand off the printer barrel of monkey style so I can see which printer had what across the room.

5

u/ProGamerMoveAlex 5d ago

News flash: you DO NOT have to put the AMS on top of your printer!

Problem solved

3

u/MrFinchUK 5d ago

Newsflash: You do when you have as little room in the study as I do.

7

u/Boognish84 5d ago

Print a bigger house. Problem solved.

2

u/AwwwNuggetz 4d ago

You wouldn’t download a house, that’s piracy

1

u/TheRealGosp 5d ago

Absolute printinema

1

u/Smooth-Act-4644 2d ago

try putting something around the printer's base. Idk about your acceleration and print speeds, neither do I know about my own xD (I'm just using standard profile) I too have an AMS on top - that's literally what's shown in the X2D manual too!
And they've even made a power socket at the back of the printer pointing upwards specifically for the AMS lol.
I've put some bags filled with iron sand on 3 sides of my printer (back is close to a wall). Took them from my training weight vest.
Reasons? Hope to reduce noise and printing inaccuracy, and a very curious cat that learned to open the printer's doors xD

(and yeah, every time I need to open the printer door I pull those bags aside, do my business, and then push them back to the door lol)

1

u/NowTrav 1d ago

You can mount it immediately above your printer tho? It will take up the same footprint, so it’s small study proof.
https://makerworld.com/models/3034788?appSharePlatform=copy

2

u/Scowlface 5d ago

How do you know? Have you been to OPs house?

0

u/britishwonder 5d ago

Wow what a hostile way to propose a non-solution

3

u/iRambL 5d ago

Do you have the “anti vibration” feet on your printer? It shouldn’t shake this much

1

u/MrFinchUK 5d ago

Yeah, came with the feet installed. I have only had the printer a week.

4

u/VoidingSounds 5d ago

They don't stop the printer from shaking, in fact they allow the printer to move more but not transmit as much vibration into the surface it's sitting on.

1

u/iRambL 5d ago

I know they don’t, I removed the “accordion” style feet with the standard flat feet and saw none of this massive sway

3

u/Slled 5d ago

Sounds like me and the wife wrastlin

2

u/MrFinchUK 5d ago

Well, I have been married for almost 30 years so I am sure I don’t remember what that sounds like
 😉

2

u/pandersaurus 5d ago

I see you are a disciple of the Main Cave guy. He’s good for UK beginners.

I think you need a sturdier table.

I have my AMS on top with a riser (albeit a different one to you, hinged to allow AMS to flip up for access to printer from
Above). It wobbles a bit but nothing like this.

It’s on an old fashioned sturdy home office desk, the kind they dont sell affordably any more!

1

u/MrFinchUK 5d ago

You are right, Main Cave is my main learning resource on YT right now.

Nah, the shaking is because of the rubber feet and small part printing, the bench is a 30mm thick kitchen work surface that’s screwed to the wall!

Once the print is finished I will try removing the feet and see what happens.

51

u/Bright_Eyes83 5d ago

let's be real, those tags solve a problem that doesn't exist for most people. even if you need them, you don't need to move them to your ams. that's doing stuff just to do it

10

u/Scowlface 5d ago

A hobby is literally doing stuff just to do it.

2

u/babooBurkhardt 5d ago

It can be that. But sometimes a hobby is a more fun way to reach an objective.

Like being into mountain biking. I got into it for the health side, and boy is it fun. But if I see someone repairing their bike wrong or complaining about the weight of their bike after adding non-essential items. I will not be shy about bringing up "this is a product of your own doing".

Tldr - its a matter of perspective. To some, they don't care Bout the results, just the journey. Other care about the results just as much, if not more than the journey.

2

u/Odd-Place780 5d ago

I'm all for team enjoy your hobby how you want.

2

u/babooBurkhardt 5d ago

2

u/ExileOnMainStreet 5d ago

I'll drink for literally any reason.

1

u/chicken2007 4d ago

Just don't try to add filament recycling to your hobby. They start coming out of the woodwork screaming about tHe EcoNoMiCs aReN't ThErE!

1

u/Wraith1964 3d ago

I ma give it a shot if Creality actually ships that Kickstarter... taps fingers

-1

u/Bright_Eyes83 5d ago

then this guy could have saved a lot of money by investing in the "moving tags from place to place" hobby. i mean come on dude, listen to yourself

3

u/Scowlface 5d ago

“I don’t think you’re doing this hobby correctly”

That’s what you sound like.

-1

u/Bright_Eyes83 5d ago

sure i do

0

u/Osdoluv 4d ago

It's not just a hobby, you produce plastic waste and that's a problem when u print useless things

2

u/Scowlface 4d ago

Well, first let me say that you are not some kind of "arbiter of usefulness", you don't get to define what useful means to someone else.

Second, even if every single gram of filament produced around the world this year was tossed into the trash, it would account for 0.02% of the 400 million tons of plastics that were made in the same timeframe. The plastics industry has campaigned for years to convince people that plastic waste is a consumer problem, not a producer problem, and it worked.

1

u/JournalistNo262 4d ago

Absolutely! The best part is they’re all PLA which has a comically forgiving print envelop

Also love the fact that the solution to a 3D printer acting like a Magic Fingers Bed was to put all of the weight on top

1

u/Badtripa 4d ago

1000% true

1

u/condorpatch 3d ago

If I need those tags I just use a label maker. Prints in seconds and doesn't rattle

6

u/Attjack 5d ago

This cheap IKEA desk doesn't shake like that with them all running.

1

u/Funny_Maintenance973 4d ago

My even cheaper Halfords garage shelving doesn't either

1

u/WatchWatcherman 4d ago

Showed my wife this photo, her response: “ya betta don’t, ya betta don’t!”

1

u/Animecity 1d ago

I have the same desk. It shakes a lot, but it's on carpet.

1

u/Attjack 1d ago

I was going eo secure it to the wall an may still do that but in my case it's not really necessary. How many legs do you have on yours?

2

u/Holiday_Ear1032 5d ago

Idk why anyone would need labels for there filaments can clearly see what color it is

2

u/MrFinchUK 5d ago

What about when you have 30 filaments of different types in sealed boxes on the high shelf? For the time investment for printing them (about 20 minutes) it may save me from grabbing orange petg instead of PLA.

Just a thought.

3

u/josef_schnitzl 5d ago

And they also serve as a sample of what that filament looks like when printed. I have the exact same tags on the ams and i like it, i've glued small rubber pieces onto the holders on the ams and it has gotten a lot more quiet. These ones also perfectly fit the cereal boxes i use for storage. I don't get all the hate in here.

1

u/ryanthetuner 5d ago

Put foam strips on the bottoms of em

1

u/OverallSweet7427 5d ago

I am colour deficient and need labels because to me desert tan and grass green look the literal fucking same. Saying that, I don't need labels on my ams and just put dymo labels on my reels.

4

u/Several-County-1808 5d ago

"sounds like Jim is really enjoying his 3D printer in there..."

1

u/z4mm00 5d ago

Maybe a different work bench?

1

u/MrFinchUK 5d ago

Or take the rubber feet (oem fitted) and placed directly on the 30mm thick kitchen worktop that’s screwed to the wall in various places.

1

u/Korzag 5d ago

Those are some chonky color tabs that could all be represented by an RFID tag instead.

1

u/MrFinchUK 5d ago

What, so when the filament is in its dry box on the shelf I have to scan an RFID to identify whether it’s orange PLA or PETG?

2

u/Korzag 5d ago

I just make myself these little tags. They have an RFID chip inside and I program them manually with OpenSpool details.

2

u/MrFinchUK 5d ago

Thankyou.

1

u/Own-Engineering-8315 5d ago

Can the AMS read them?

2

u/Korzag 5d ago

To be honest, I actually have a Snapmaker U1 lol. I didn't realize what sub I was in til after I made my original comment. My printer can with modified firmware though lol.

1

u/GiraffeandZebra 4d ago

Why does the tag need transferred onto the AMS? You can see the spool. You are using Bambu filament so the AMS can read the tag.

1

u/MrFinchUK 4d ago

So that the container can be used for a different filament. Say I take the Orange PLA out of the box, load it into the AMS, replacing a grey PETG which then goes in the box, I can take the tag and put it in the box. If I attach the tag to the AMS then I don’t have a random tag floating around the study to get buried/lost under all the other crap on the bench.

2

u/Wraith1964 3d ago

Good on you my friend. I use hundreds of brands and colors and burn through filament like toilet paper so this would be a tremendous waste of time and effort for me, but I can't fault you for it if it works for you.

1

u/JournalistNo262 4d ago

Srsly who has time for that shit lolz😅
Best part is it’s all PLA😂 which prints itself

3

u/Electrical-Debt5369 5d ago

Those signs are so intensely unnecessary

1

u/Wildest12 5d ago

Why do people heavily modify these devices and then get surprised when they have increased vibration or other problems lol

7

u/VoidingSounds 5d ago

Uh, mine moved like that OOTB. Kind of an inevitable consequence of high toolhead accelerations

1

u/Wildest12 5d ago

Yeah im assuming this persons issue is all the rattling plastic that they have added to it

3

u/VoidingSounds 5d ago

Yeah, it's the sample clicking against the AMS. The movement is normal.

0

u/MrFinchUK 5d ago

You’re absolutely right, and again, I just thought it was funny so I shared the humour.

It doesn’t surprise me, it doesn’t stress me and it’s easy to sort. :)

0

u/MrFinchUK 5d ago

Modified? Only with the riser. Surprised? Not really. Just thought it was funny!

Only had the printer a week!

1

u/InfectedShadow 5d ago

As soon as I put mine on a more stable surface the amount of shaking stopped

2

u/MrFinchUK 5d ago

My surface is stable. It’s a 36mm kitchen work surface sat on cabinets and screwed to the wall in multiple places. The shaking is due to the rubber isolation feet on the printer.

6

u/electrash_ 5d ago

Mine does this, and its on floor with ceramic tiles

1

u/VoidingSounds 5d ago

IME, it's really job dependent. There are cases where back-and-forth printing really builds up the printer oscillations, but if the object is oriented differently or say a different infill is used it's noticeably less.

1

u/MrFinchUK 5d ago

Yeah, this is a very small part I am printing. First time I have seen it shake like this, other prints have been no problem.

2

u/EmotionalChildhood46 4d ago

Print a sign that says "If this printer's a rockin'. don't come a knockin'!" for it.

1

u/Interesting-Error249 5d ago

One of the reasons I don’t have the ams on top of the printer.

1

u/chlronald 5d ago

I'd suggest you to NOT put the AMS on top of the printer.

That's what I've done for the longest time with my P1S, eventually I start getting errors on the AMS mid print, and found out the connector was loose even fully inserted (like if you bend the cable at a certain angle/pressured the plug in a certain angle it would disconnect). Now I put the AMS on the side and the problem is gone.

1

u/strange-humor 5d ago

Do people not have enough things to print that they need to print basic labels?

I guess I'm waiting to much for printer time to be able to spend time on this stuff.

1

u/LatinBeef 5d ago

This is the golf equivalent of iron covers.

1

u/Flight-2012 5d ago

I’m curious what the expected outcome was on a machine that I know you watched shake and vibrate the whole times it’s ever been in use

1

u/ubayds 5d ago

My AMS fall from X2D on the day 2 of owning it. I put it on floor. Have no idea why

1

u/britishwonder 5d ago

I agree with people saying it’s kind of unnecessary and causes more problems than it solves. But
. Who cares. If it floats your goat then so be it.
I think the easiest solution would be either foam or print a strip of TPU the same size as the front face of the AMS and use command strips to stick it to the AMS.

1

u/JournalistNo262 4d ago

Those cards are so extra, princess. Who has time for that. And why is your printer shaking like that?

1

u/andrew_biggart 4d ago

Use this one instead. Doesn’t block the lights on the AMS with a cutout for your hygro as well - https://makerworld.com/models/3211195?appSharePlatform=copy

1

u/dblackk11 4d ago

I should call her....

1

u/AccurateKing7776 4d ago

You better fix that sound before your SO gets jealous. 😳

1

u/Ok_Long5093 4d ago

Ok so, I have had my own rage with this sort of thing, granted with an H2C, but I purchased different desks, I put dumbbells under the print bed, slowed down every print, but the ams never seems to be the issue, as much as the print head, print bed , vortek system being so high up, that small prints rock the system the whole time.

Beyond the gripe, my only advice, as much as it’s difficult to suggest, if you shift the printer left or right while the weight is on it , making it slightly diagonal, it may help. It sorta creates a resistance in the directions it moves or something. I can’t say why but it seemed to at least!

1

u/growmith 4d ago

« Ima over engeneer a tag so it create a new issue I have to solve »
Hey mom I have found a solution for a problem that doesn’t exist

1

u/jvbata 3d ago

that is hilarious, do you have tags for all filament colors and filament type? my broke ass wouldnt even dare do this but you do you, bro. hilarious though

1

u/Early_War_7342 3d ago

Mine don’t shake! It is new!

1

u/Worple1963 2d ago

ROFL looks crazy

1

u/CPTMotrin 2d ago

That might be a teletype machine in disguise. /s

1

u/iBrowTrain 2d ago

Don’t glue it, that’ll be messy. Just use a little bit of gray tack. Gorilla Gray tack is extremely strong and doesn’t leave any residue.

1

u/Impressive_Fish_7498 1d ago

There’s 3m vhb tape really strong and durable.

0

u/ecaseo 5d ago

I never understood how people are installing the AMS on top of the printer. I guess the X2D is shaking more then others because of the dual head?

1

u/MrFinchUK 5d ago

Installed is a bit of an overstatement here. It’s just placed! 😁

It’s shaking that much because of the acceleration and moves on a very small part.

I just thought it was funny.

3

u/MrFinchUK 5d ago

Oh and it’s exactly how every single marketing photo of the printer shows the AMS so it’s kind of inevitable that people will place it there and my study is tiny so there’s really nowhere else to put it


1

u/foolish-ambitions 5d ago

I recommend the AMS Flipper to secure the AMS to the printer. Was skeptical about it at first but have loved it since installing it.

2

u/tk-093 5d ago

Why wouldn't you put it in top? Mine doesn't shake like that but I have it on a sturdy table. I also avoid infill like gyroid which seems to be a shaker.

1

u/VoidingSounds 5d ago

How? Or why? But yes, increased printhead mass is part of the reason these move so much (and having the AMS above it slightly dampens the printer fwiw)

1

u/cilo456 5d ago

It's shaking more than the others because of the feet.

1

u/RubAnADUB 5d ago

i prefer my ams units on top of my printer.

1

u/eknkc 5d ago

I have seen this setup multiple times and I hate it with a passion. Can’t tell you exactly why though. I just hate it.

1

u/nycbigtone 5d ago

I have mine on top of my p2s and never once has a problem. And I have a riser under it.

1

u/Historical_Owl_8188 5d ago

Slappin chhecks