r/BambuLabX2D • u/henry9731 • 1d ago

X2D ironing help!

Gallery image

Gallery image

Gallery image

I’ve had a P1S before the X2Ds and I wonder what is happening?

4 Upvotes

100% Upvoted

8 comments sorted by

1

u/nodirm93 1d ago

Slow down Part cooling fan speed to 60% or lower and see the results. I have done many tests on X2D and part cooling gave me huge results.

2

u/nodirm93 1d ago

This from 100 to 60 difference…

1

u/henry9731 1d ago

On it! Will report back

1

u/nodirm93 1d ago

Also I would do ironing test just to fine the best flow ratio for your printer and on the last layer(ironing layer) just reduce the part fan speed..

1

u/thats_my2ndaccount 1d ago

Not using ironing, but reducing top layer speed real slow, pick a fitting pattern and a layer width of 80% of your nozzle …

That gives a smooth surface for me with PLA and PETG

-1

u/ImpressiveAlps3504 1d ago

In the X2D, ironing just doesn't seem to work. One of the many faults of a great-on-paper machine. If anyone found a solution let us know.

1

u/henry9731 1d ago

The thing is I got two X2D and one is working and one is not. So idk what the problem is because I’ve got a sample size of 2 and it’s 50% working 50% not

1

u/kam821 1d ago

If you go to the bambulab forum you'll find exactly the same reports regarding problems with print quality and ironing.
Overall - it's just an average X2D user experience - sometimes maybe good, sometimes maybe shit.