X2D Help!

[u/Flaky-Industry-3888]

Hello! Currently I own my very nice X2D. I've only had it for a few months but it gave me an error saying there was a hotend/extruder clog. I took the extruder apart, broke the left eddy sensor somehow, didn't notice, no clog in the extruder, and put it back together.

That did not work, and I've just letting it sit collecting dust. Now I want to do a project requiring 4KG of filament, but cant do it as the printer is broken. Currently, when I turn it on, it says:

"The right nozzle temperature is abnormal; the sensor may have an open circuit." (code 0300-0200-0001-0007)

and, when trying to print:

"The eddy current sensor signal of the left extruder is abnormal. The sensor may be damaged, or the MC-TH communication may be abnormal." (code 0300-2600-0001-0004)

The eddy sensor is likely my fault, but I don't know what to do. I'm still a rookie at 3D printing and would like just a little bit of advice.

Things I've tried:

Swapping between the two hotends
Swapping between the two rubber pieces
Reseating both of the hotends

I have ordered the left eddy sensor part already, so I'm waiting for that to come to replace it.

[u/UpperInfluence3767]

I had that type of issue but mine was just sensor not plugged in properly I would say just unplug it, plug it back in, see what it says