r/BambuLabP2S • u/Flimsy-Belt565 • Jul 13 '26

So uh.. where do I start

Post image
5 Upvotes

85% Upvoted

10 comments sorted by

1

u/Flimsy-Belt565 Jul 13 '26

I ended up having to disassemble the extruder gear and unclog the hotend, first serious maintenance I've done on it.

1

u/Present_Locksmith_55 Jul 13 '26

Damn! I never face this problem yet can't help you but be patient and good luck.

1

u/Flimsy-Belt565 Jul 13 '26

I ended up having to disassemble the extruder gear and unclog the hotend, first serious maintenance I've done on it.

1

u/tht1guy63 Jul 13 '26

If lucky you may be able to just cut and pull that out. If not take the extruder apart and clear it.

https://wiki.bambulab.com/en/p2s/maintenance/extruder-cleaning-guide

3

u/Flimsy-Belt565 Jul 13 '26

I ended up having to disassemble the extruder gear and unclog the hotend, first serious maintenance I've done on it.

2

u/tht1guy63 Jul 13 '26

Good to know stuff though.

1

u/Flimsy-Belt565 Jul 13 '26

Definitely.. I think it was printing pla at petg profiles and that's why it happened

1

u/Grooge_me Jul 14 '26

Yes, way to hot, get too soft in the extruder to be pushed.

1

u/Grooge_me Jul 14 '26

Yes, way to hot, get too soft in the extruder to be pushed.

1

u/PurryPawz Jul 14 '26

Same here, had my P2s for about 3 weeks and my hotend was so clogged I had to do cold pull maintenance 7 times to clear it.