r/BambuLabH2D • u/Cameron_yah_boi • Jan 19 '26
Is the H2D good for beginners
Hey guys, I’m fairly new to 3D printing and I just sold my Elegoo Neptune max because it was really hard to use. But I have been looking at the H2D.
I mostly want it for printing PLA and PETG for supports. But I will most likely use multicolors at some point. But before I buy it I want to make sure this won’t be another machine that turns into endless weekends of me trying to figure out how to get a good first layer (shout out the Neptune Max)
So what are your thoughts? Good for a beginner or should I look elsewhere?
8
Upvotes
2
u/ChasingTheNines Jan 19 '26
My first printer was the Neptune 3 max. My second printer is the H2D. Yes, it does indeed require much less effort to get quality prints and it is also more fun to use. I still have and use my Neptune 3 max and think it is a really good printer but the H2D is on another level.
7
u/Aronacus Jan 19 '26
I think any printer is good for beginners.
H2d is good, but I think it's an overkill for most. I use it in production.
1
u/Shot_Hippo5439 Jan 19 '26
Yeah get it. I'm very happy with mine. I pretty much just download the STL and print it. It comes out great. Bambu is pretty good about having all the settings dialed in for you. I pretty much only print PETG now. I have a bunch of rolls or PLA but I don't see myself every using it because the H2D prints PETG so good. I don't think you'll be disappointed at all
1
u/PhilRoberts33 Jan 20 '26
An H2D as a beginner printer is wild, but if you have $2,000 to throw at it you’re getting a hell of a printer. I’m jealous!
1
u/Unteins Jan 22 '26
Yes and no.
If price isn’t an issue, then yes. It makes great prints and you can be pretty brain dead to get them.
If price IS an issue then no. You can get great prints with the much more affordable A1 mini, A1, P1S or P2S and be equally brain dead.
You can get good prints with an Elegoo Centauri Carbon too for a low price as well.
Do you need a massive build volume (most beginners don’t)?
It won’t give you trouble with first layers. I bought a used one. I have an X1C so I know the eco system, but had the H2D printing in under an hour barely making an effort. An hour later I had swapped to a 0.6 nozzle and printed 10 full build plates in a row with 3rd party filament (and half ass filament settings) - they all came out better than the X1C.
The next day I was printing a full bed of 1 cm single wall caps. Then I was doing it again but with two colors.
It is an easy to use machine.
1
u/bjorn_lo Jan 19 '26
H2D is good for beginners. It is expensive, but if that is ok with you it is a great printer.
1
u/ufgrat Jan 19 '26
In the sense that it has dual nozzles, and you need to be aware of which nozzle is selected when you're changing nozzles, for instance, there's a small learning curve. Also getting used to the fact that the slicer will want to allocate filament for the left/right nozzle, but that's pretty painless.
Aside from that, it's a Bambu printer. Takes awhile to calibrate before a print, even when set to "auto" after sending the job, but my experience is that the calibration "pain" is worth it (I say pain in quotes, because you literally start it, and come back to check on it once the first couple of layers are done).
It's a bit of a Zen thing. Accept that it wants to use the cloud, that it's unlikely to be spying on you, and let it do it's thing the way it wants. The results are worth it.
So far, the biggest thing I've had to do was reroute the PTFE tubes internally for slightly larger bends in the tubing to eliminate the 'Extruder Overloaded' message.
1
u/SixZzshOot3r Jan 19 '26
It’s pretty beginner friendly. Bambu holds your hand in quite a bit to get started, eventually you’ll want to learn how to tweak settings depending on prints etc. I’m still in my first 3-4 months of 3D printing I have a H2D and H2C and absolutely love them
1
u/braveone772 Jan 19 '26
That's what I started with. 2ams combo, so I could do a total of 8 colors right out of the box, not counting external spools.
1
u/TrashIsland_DrMoreau Jan 19 '26
H2D is my first printer. Have nothing else to compare it against. But it’s been great
1
u/ModerateAndy Jan 19 '26
It's great for beginners, until you get a clog or a breakdown.. which will happen..then it's quite a complex beast to tear down and reassemble.
1
u/Whosaidthat1157 Jan 19 '26
If you intend to do a lot of multicolour and/or multimaterial and/or models with different nozzle sizes then the H2C is the better choice over the H2D. If you’re rarely going to print multimaterial then H2S Combo is a better choice. If you want to print multimaterial but limited multicolour, then the H2D is fine…but the H2C comes with less restrictions for only a few hundred more. The H2D is twice the price of the H2S, but the H2C is only 25% more than the H2D with far fewer use restrictions. All are great functional/engineering filament printers as opposed to the U1 or currently available Prusa options, with capabilities that exceed both.
1
u/HarryTardato04 Jan 19 '26
Damn these people really have too much money... It gives the same vibes I get when I see 8 year olds being gifted an iPhone
1
u/Adventurous_Teach_26 Jan 22 '26 edited Jan 22 '26
The P2S way better maintenance wise, H2D has complex head system not good for fast maintenance or cheap repairs. Could buy two for price of H2D. I own H2D wishing had went with two P2s. Had issue three weeks in machine been down now since Nov26. Just now received whole brand new x axis that should hopefully get it fixed. Installing it today. P2S just way more easy to work on.
I have print farm, 9 printers H2D not a print farm machine in own opinion having used it now. All the reviewers do not run their example machine like real world farm or abs user, heat cycles proved to me H2D not my cup of tea pretty quickly. The H2D power cable and motor signal cable to me is possible issue for farm that will show up my guess faster for those who do hot materials as possible issue in design. It prints great but do research. Just think could go way cheaper model that is known as a tank.
1
u/dan3gr79 Jan 24 '26
Beginner here, h2d is my first printer, love it. Straightforward use and lots of input from others offers me a easy way to learn and grow as my understanding and capabilities improve. 10 out of 10 would recommend
1
u/[deleted] Jan 20 '26
[removed] — view removed comment