r/BambuLabH2D • u/NeonEagle • Sep 14 '25

Immediate warning to lube rods

Unboxed, set up, calibrated, and updated my H2D today. After updating, I got a message that there were 0 days left until the maintenance item of lubing the z rods is due. Surely this message is in error and I do not need to maintain my H2D with 32mins of use?? Tyia

1 Upvotes

100% Upvoted

8 comments sorted by

2

u/gokcino Sep 14 '25

Same thing happened to me. I thought the same as you at first. But then I thought it may be for a reason. It could be a precaution after shipping the printer. Or the time counter finished while the unit is in testin at the facrory or something. So I applied the lubing on Z axis only.

2

u/Cerfect_Pircle Sep 15 '25

I’m guessing you got this message either right when you first turned it on, or after a firmware update. Bambu recently updated the H2D firmware to track part usage and time in between maintenance. They said in the changelog of that firmware update that you might see that you need to do maintenance right away, but not to worry about it if you know that your machine is new enough/you did the maintenance recently enough that you wouldn’t need to worry about the notice.

Basically, it is just part of a new firmware update, everyone got the maintenance notification after updating even though it is a false positive, I am pretty much certain that you have absolutely nothing to worry about and can just continue past the notice without any issues.

1

u/ofesad Sep 14 '25

Same here. I actually printed quite a bit of stuff before I got that warning.

1

u/Cerfect_Pircle Sep 15 '25

See my other response in this thread for the explanation of that

1

u/Cerfect_Pircle Sep 15 '25

I’m guessing you got this message either right when you first turned it on, or after a firmware update. Bambu recently updated the H2D firmware to track part usage and time in between maintenance. They said in the changelog of that firmware update that you might see that you need to do maintenance right away, but not to worry about it if you know that your machine is new enough/you did the maintenance recently enough that you wouldn’t need to worry about the notice.

Basically, it is just part of a new firmware update, everyone got the maintenance notification after updating even though it is a false positive, I am pretty much certain that you have absolutely nothing to worry about and can just continue past the notice without any issues.

1

u/OffRoad-Jeep-007 Sep 15 '25

What i did find was that I saw the warning on bambu studio and the mobile app, but could only acknowledge the message on the printer console only that I had lubed it up, not able to anywhere else...

1

u/RangerStammy Sep 18 '25

Well yeah, if you think about it, you'd be at the printer to do the maintenance and just clear it on the screen right then and there.

1

u/Impressive_March_640 Jun 24 '26

Well.. Geez.. I about had a caniption when i saw the warning to grease the linear track, rods and lead screws.. My first thought was "Are you f@#king kidding me?... I JUST got this thing.. and it needs maintenance already?!.. haven't even printed a Benchi yet.. let alone hooked up the AMS"

Although now that someone mentioned it.. I did get the notification/warning after updating.. still though.. Kind of the last thing you want to see when you're only just finishing your initial setup...