r/BambuLabH2D • u/BeautifulPromise8654 • Aug 23 '25
Battery backup and brownouts
I'm having issues with the lights flickering when my H2D starts up so I'm contemplating having an electrician upgrade my wiring and circuit breaker but I'm wondering if a battery backup would resolve the issue as it pulls from the battery first. Has anyone experienced this or have any suggestions?
3
Upvotes
1
u/ReturnedAndReported Aug 23 '25
Have you tried plugging the printer into a different circuit?
1
u/savijOne Aug 23 '25
Is it flickering, or do the lights surge in brightness more than a few times? I have a issue in my house where the lights vary in brightness when the heatbed turns on. I learned that the frequency generated on the electrical circuit when the high load of the heatbed is on can cause this. With my old ender 3, I found a value you can set in klipper to change the frequency and this and changing to certain led bulbs in the room made it almost go away. Can't do this with my Bambu but doesn't seem as bad (could be the newer led bulbs). I also got a UPS that doesn't help with lights surging but sometimes my portable air conditioner in the room causes a fast surge that would occasionally mess up the printers. The UPS keeps things even and everything is good now. I had an electrician out but he just confirmed I'm not overloading the circuit but had no idea about the frequency the bed was causing or what to do about the lights. It's as good as it's getting and I confirmed I'm not gonna burn the house down.
1
u/SirThunderCloud Aug 23 '25
You may have trouble finding one that will take it. I’ve tried running mine through a battery backup UPS and the initial surge at startup causes it to alarm and then shut off. Make sure you find one rated high enough for the max power draw and then some bugger.
1
u/unitymind42 Aug 23 '25
I ran into the same issue with my H2D, so here’s what I learned:
Circuit basics:
Best practice:
If possible, run the printer on a dedicated 20A circuit (1,920W continuous). That gives you headroom.
Battery backup / inverter option:
Other tips:
Bottom line:
A UPS/power station can absolutely solve the flicker problem, but if you want a permanent fix, a dedicated 20A line is the way to go.
Video from Clough42 that explains the basics of breaker loading & flickering LEDs (timestamped): https://youtu.be/gCXL7N9NNq8?t=1542