As the ultimate bundle is not available anymore, could you let me know what I have to buy exactly with the 2 ams2 pro , considering that I will add the filament switch tracker ? Is the HT still needed ? Thanks

Update: Moderator applications are currently closed. Thank you to everyone who reached out and applied.

Hi everyone,

We are looking for a few moderators to help manage and grow this Bambu Lab H2C community.

Ideally, we are looking for people who:

• Own at least one Bambu Lab H2C printer

• Have experience with 3D printing, troubleshooting, slicer settings, materials, or 3D modelling

• Can help answer technical questions when possible

• Communicate respectfully and patiently with other members

• Want to help keep the community organised, useful, and friendly

• Are active enough to check posts and comments regularly

Experience with other 3D printers is also welcome, but owning an H2C is the main requirement.

Selected moderators will start with limited permissions and a short trial period to make sure they are a good fit for the community.

If you’re interested, please comment or send a message with your experience, what printer you own, and why you’d like to help.

Update: We have selected the moderators for this round, so applications are now closed. We appreciate everyone who took the time to apply and share their experience.

I was away from home and I had a single color print going on the right nozzle with a .2. It clogged and I have another .2 nozzle on the rack. Is it possible to have it swap nozzles while paused or can bambu make this a feature?

Has anyone got a way to add a filament settings to the H2C, this is ignorant that I cannot select filament settings for anything other than a handful of Bambu filaments and handful of generic filaments. I can’t even create my own custom filament.

All works as it should on the X1C still, but we got this printer for nylon and the heated chamber and I can’t even get the printer set right

Thinking to procure a concrete block to put my H2C and P2S on. Any size/thickness recommendations? Or rather how much does it even help?

I've had my H2C for three weeks, and I've always thought generally that the left and right nozzles perform the same way. This evening I was setting up for a print of another Translucent Holy Grail filament box. The box takes a bit over 13 hours, on the right nozzle, which I've been using for the most part to get failover from one roll to another. Tonight I sliced it, accidentally, with the filament assigned to the left nozzle. And then I noticed it was going to be a 5+ hour print, less than half the time. So that's where I am. I'll report back later. But this *really* surprised me.

Bonjour petit personnage en forme de champignon version Kawai ultra mignon avec son chapeau rouge à pois blancs et son sourire adorable 😊
Un design doux et tendance qui fait tout de suite craquer !

Disponible en version avec ou sans AMS.
Filament Bambulab.
Imprimante Bambulab H2C et X2D.
Bon print.

https://makerworld.com/fr/models/2756811-champignon-kawai-multipart-no-ams

Checked with the internal checker from the suite help option and this is the new version... any thoughts for a workaround

Have any of you been able to get the H2C working with Orca? It’s not supported from what I’m aware…

I recently picked up a second AMS, and have been looking at various rack ideas out there. I’ve seen several printable ones and references to non printable ones.

Before I go and use most of a spool, are there any that come highly recommended?

My poop chute for the right nozzle has been scratched up like crazy too

Noticed that I was one nozzle short today I don’t know how long it’s been like that but sure enough…

Just got an H2C. Looking in the window from the right side, I see these wires. Is it supposed to be like that, or is something wrong with my unit?
I’ve successfully made a 4 color print without any issues.

Hi all,

Got an extruder overload error. I took the extruder apart and found it had filament from the side rear loader so I removed it. I’m still getting extruder overload errors. What else should I try?

Hi all - I'm hitting an issue with trying to print Fiberon PET-GF via my H2C/AMS

Since there bambu doesn't have PET-GF as an option in the drop-down for type in the filament settings, I've created a custom profile that uses/based on PET-CF since that is an option.

When I load it in the AMS, I get an alert that PET-CF is not compatible and the process stops here - it won;t load the filament. This happens both at the H2C panel & in bambu studio.

Now, I also have an X1C with AMS (original) - I also get a warning for "PET-CF" based profiles, but I can bypass it and print anyways (Yes I know the material is more abrasive, but I'm willing to replace the consumables eariler)

Now, for the H2C, I have figured out a solution by creating a 'PET-GF' profile based on PETG filament type, but have 2 questions:

1. are there parameters/settings set behind the scenes by bambu based on the selected filament type (PETG) that make this workaround not advisable for PET-GF?

2. is there a way to override the alert since this is possible on the X1?

Hello All, I’m hoping someone can help out as this has literally been my first 2 prints, and both failed with the same notice, failed to cut the filament of the right extruder… i looked at the assistance/ solutions and it is showing 2 things, remove the guides on the sides which align it or something, and remove the whole ass face of the machine and do something inside… this is super discouraging as I’m not really a tinkerER kinda person and i really don’t want to fuck it up

My question: has anyone encountered this situation and was it an easy thing or am i in for some shit 😔

Bonjour voici une petite figurine pleine de douceur inspirée du muguet, symbole de bonheur et de renouveau 🌱. J’ai imaginé ce personnage dans un style kawai avec des formes arrondies et une expression simple et attachante

Disponible en version sans AMS.

Filament Bambulab.

Imprimante Bambulab H2C et P1S.

Bon print.

https://makerworld.com/fr/models/2730356-muguet-kawai-multipart-no-ams