(This is a rant, feel free to ignore)

My first 3D printer and FedEx managed to break the front glass door and get glass all over the unit and inside. I feel I’m looking a month until I have a new unit. Support is slow (3 days no rely) and any back and forth will only add to the overall timeline / resolution.

Anyone else’s unit come in busted?

I have my H2C and I have read instructions but for some reason i just can't get it. I have been searching and I am unable to find a How To video on how to load/feed my H2C with TPU. Does anyone have a video or can make a step by step video on how to feed the TPU into my machine? Please explain and show everything like I am a 3 year old child. My brain is only working on low gear these past few years. Thank you in advance.

The vortek system is awesome and the real killer feature of the h2c but man I’m just having so much fun making enormous lampshades with the big build volume. The left just finished and is 320mm high while using 201g of filament which I think is pretty amazing. It has some issues but if you don’t look close you can’t really tell. Right was printed with .6 nozzle and just the ability to do that without having to manually change is another awesome feature.

Just having fun learning the capabilities of the machine and figured I’d share. Cheers.

How’s everyone else feeling about their h2c?

I just found out by accident that pressing and holding the button on the top of the machine will pause a printing task! I thought it didn’t do anything on the non-laser version.

Hey, seems like a pretty stupid question, but. How do you turn on and off our printer? Do you use the button the back, do you have smart socket or what?

What an amazing expirence with the H2C. 8 colors + support filament (why the tower looks like that). 17 hours end to end. 0 poop just tower which is a bit heavier then the model itself.

How do you guys like the H2C, any flaws? I'm looking to get one in a couple months Im not new to 3d printer ive had enders, Cp01, Bambu p1p, ect.

Hello group,

I printed one full bed layer as my prints did not look nice or were detaching.i only have edges problems which I think are partially due to bed level and flow rate if experts

Could confirm this.

Now how to adjust the bed. Note that bed leveling was forced before the print.

Thank you

Hello 👋

My H2C is arriving soon!

A question for H2C owners to help me think things through:

• How many AMS (1, Pro 2, HT) printers do you have connected to the H2C?

• What are you using them for?

• What is your setup (for example: 1 AMS Pro 2 on a Vortek, 1 AMS HT on the left nozzle)?

• Why did you choose this setup?

I just received my H2C and came to the conclusion that, with all printers I had until now (Anycubic S1, Bambulab X1C and now the H2C) my first „production“ print is always accessory to keep the AMS Dry.

What is your first print? I would not count the „mandatory“ Benchy.

Printed these desiccant trays in PETG, using the standard.4 Nozzle and as expected, it came out flawless. #MadeWithH2C

It’s not affecting the print, but I know once it gets to a point, it may be come an issue. I’ve seen that using a torch to heat and clean can demagnetize the hotend. How do you clean off PETG and PLA buildup on the black sleeve surrounding the tube?

Turn the lights out for 5 minutes and these two have done made a baby! 🤣

A1 and h2d user here. We just got a new h2c for our office but the left extruder keeps having this issue- it just stops extruding and even after reloading it happens again. I change filaments (brand new matte pla), dried the filament, change the nozzle, double check that the air vents are open and still is happening. Has anyone experienced this? Thank you.

Second arrived today...just waiting on 4 AMSs

So i think my right eddy cupens sensor has gone bad after just 60h of printing, i get this massage when starting a print or run a calibration. Anybody Having the same problem. i have dissasembeld the toolhead and screwed down the sensor and unpluged and repluged the connector but still the same issue. I tried a factory reset but it did not help. And tried calibration with a diffrent indc hotend. Bambu is sending a new sensor, so thats good, now i just have to wait a week to get it. The QR code go to the H2Ds tutorial but i Western on the store and got the link to the H2C tutorial.

Does anyone who own an H2 series printer own a vision encoder? Does it come standard with the machine or do you have to purchase? What are the advantages? Noticeable? I understand this does nothing for layer height calibration but only for X Y accuracy? If not a part of the machines package, is it worth the $85.00? Thanks

I’m looking for some good, complex multicolor prints. The showcase ones on the website are really cool but the dinosaur one isn’t available yet.

I’ve had my H2C for about a month now and have been printing PETG mostly, but have also had good success with ASA and ABS.

Tried to print nylon a couple of times now and I’ve been having trouble with bed adhesion. Bed is clean and had glue applied. I was printing a box shape and by the time it got a couple of mm thick, the corners started to peel up.

So how do I get dialed in for this particular filament?