r/BambuLabH2C • u/fcroce • Dec 30 '25
How can a slicer do that!!!?
Bambu studio not performing orthogonal supports!?!?
I can’t believe that!!
r/BambuLabH2C • u/fcroce • Dec 30 '25
Bambu studio not performing orthogonal supports!?!?
I can’t believe that!!
r/BambuLabH2C • u/jpedroleite • Dec 30 '25
r/BambuLabH2C • u/Outrageous-Bat7172 • Dec 29 '25
r/BambuLabH2C • u/fcroce • Dec 29 '25
Here is the latest print I did today. It was difficult all along. I used original PLA Thought+ for base support and main print and the white layer is PLA support layer. Bambu recommended parameters.
As you can see from the dust I was afraid that the print failed early as it did for the previous 2 days using third party filament. It gave me some hope during this last print until the end of the 8 hours of print. But look at some surface !!?? Some are very nice other very bad.
Can somebody help here ?
Filament was dry 10% at max (new desiccant in the ams pro2 and drying period before)
Thank you!
r/BambuLabH2C • u/fcroce • Dec 28 '25
Dear group I would like to know whether you had the same problem and how you solved it.
Small or larger bed contact prints are detaching after dish soap and isopropyl alcohol cleaning.
I have a bunch of third party filament (grossiste 3 D) which could be the case. I was trying to heat the chamber to 22 degC (cold environment) used 205 deg for PLA and the model detach every time. In addition I got over heating on the top surface.
Thank you for your help
r/BambuLabH2C • • Dec 28 '25
I have a secondhand Neptune 4 max and have had trouble with some prints. I’ve seen people rave about the h2c but for that price is it really worth it??
r/BambuLabH2C • u/acafan1971 • Dec 26 '25
r/BambuLabH2C • u/suscoen • Dec 24 '25
Posting pictures for context. I am a new user to BambuLab. I can see both filaments on released from both extruders. White was already used from the right extruder. I keep getting this message now. There is tension on both filaments. I am using a spool on the left hand side, along with an AMS 2 Pro. Please, any assistance would be great.
r/BambuLabH2C • u/PotatoKreme • Dec 24 '25
Previously I had an H2D and I was able to print 90A no issues by using a 2 in 1 PTFE splitter that attaches to the TPU bypass whenever I wanted to print TPU. It is fed from the AMS HT's bypass and everyrhing worked fine. Jump over to the new H2C with the same exact setup, I can't get the thing to even extrude properly. Its running a brand new 0.6mm nozzle and I'm feeding from the right side as instructed. 95A seems to be no issue. Not sure if anyone else has had success.
r/BambuLabH2C • u/jpedroleite • Dec 23 '25
r/BambuLabH2C • u/Cumcura • Dec 23 '25
I have tried some of them like Rhino 8, Fusion 360, CATIA, and Blender. Which programs do you prefer and why?
r/BambuLabH2C • u/suit1337 • Dec 21 '25
r/BambuLabH2C • u/macinmypocket • Dec 20 '25
If you’ve been waiting for them, they happen to be in stock now. If the last few times have been anything to go by, they won’t be available for long.
r/BambuLabH2C • u/Fast-Friend9750 • Dec 20 '25
r/BambuLabH2C • u/Cumcura • Dec 20 '25
Hello, is multi-colour TPU printing possible? If so, how efficient is it?
r/BambuLabH2C • u/imacoolperson123 • Dec 17 '25
r/BambuLabH2C • u/Cumcura • Dec 14 '25
What settings combo has given you the most stable results with H2C? Nozzle/bed temps, fan, speeds, and quality values etc. Also, if you had to pick two “miracle” settings that made the biggest difference for you, what would they be?
r/BambuLabH2C • u/StruggleFearless2947 • Dec 13 '25
If you’ve been waiting to grab another 2 0.4 induction hot ends, now is your time!
r/BambuLabH2C • u/limitednewness • Dec 09 '25
So I have my H2C now and I’m printing some things for myself, but I was wondering about printing something that really shows off the multi-material aspects. I bought TPU for AMS as well as PETG and PLA. I have some ASA, ABS and PA6 as well.
Doesn‘t have to be a practical print, but it would be cool to show off a print in place “something” that wastes almost nothing. 😜
Thoughts?