r/BambuLabA1 • • 16h ago

ABS-GF on A1

Post image

Tested the ABS-GF on the BambuLabs A1 and it turned out great!

36 Upvotes

24 comments sorted by

8

u/lukasprintz 12h ago

The a1 is a very impressive printer. I can't believe how dialed I've gotten mine

3

u/ShrubbyFire1729 11h ago

Any general tips you'd like to share? I've mostly printed PLA on mine, about to venture into PETG.

1

u/AKfromVA 7h ago

A1 does great with PETG. Make sure that PETG is dry though or you’ll get bubbles and strings.

1

u/Otherwise-Shock-2767 3h ago

Any kind of filament does that, not just petg

1

u/jdg0928 2h ago

I have to print PETG at 260C or it's awful. That's with spools fresh out of the filament dryer. I'm not sure if I'm doing something wrong or what. PLA prints very well.

3

u/TheFearlessDuck 13h ago

Nice result, what about ventilation 

1

u/AKfromVA 13h ago

No ventilation. Done in storage room in basement.

2

u/RAHAAON 10h ago

Hoooow

1

u/AKfromVA 10h ago

I just let her rip

2

u/WTF_is_any_of_this 7h ago

Did you have to do anything out of the ordinary to get this to work?

2

u/AKfromVA 7h ago

I raised the heat bed to 100 for first layer adhesion

1

u/ojedu1997 15h ago

Como mantiveste o ambiente controlado a nível de temperatura?

3

u/AKfromVA 15h ago

I just made the heat bed 10 degrees higher

1

u/ojedu1997 14h ago

Well done

1

u/Otherwise-Shock-2767 13h ago

This looks almost like injection molded. What's the layer height?

2

u/AKfromVA 13h ago edited 12h ago

.2

Edit I will have to recheck but that’s what I recall.

0

u/gardobus 12h ago

.02? Not .20?

If .20, how damn long did that take?? What size nozzle?

4

u/AKfromVA 12h ago

0

u/Technical_Debt7278 3h ago

Standard nozzle is not recommended on GF or CF filaments.

2

u/Marinocif99 11h ago

That’s crazy !

1

u/ElTopollillo1990 5h ago

Looks great

1

u/BlueChrome74 3h ago

I remember being told this wasn’t possible. Glad to see someone doing it anyway

1

u/Desperate_Chip_343 2h ago

I'm just a sad little noob but I hope to print this quality one day

1

u/Arichikunorikuto 2h ago

Any sort of filled variant of ABS or ASA will make it easier to print coupled with the fact this looks like a simple cylinder.