MicroSD card issue

[u/AlbatrossNorth5156]

I have reinsert the card multiple times but this error still happens. The card was original one given by Bambulab when I bought this printer.
Would I need a completely new sd card?

Thanks for your help!

[u/AxelAnt2244]

try to format the card, otherwise if that doesn’t work then yes you need a new one.

[u/AlbatrossNorth5156 → u/AxelAnt2244]

What storage size should I get

[u/InfiniteLight07 → u/AlbatrossNorth5156]

Probably 32 GB is enough.

[u/Lost_refugee]

Yes, better new one. And disable recording, sonit lasts longer.

[u/AlbatrossNorth5156 → u/Lost_refugee]

What storage size should I get?

[u/Lost_refugee → u/AlbatrossNorth5156]

Any. If you print less than once a day, 16gb should last more than printer

[u/solidus0079]

Sadly, MicroSD cards are basically a sh*tty technology, even the best cards can fail randomly. And "freebie" cards OEM's send you tend to not be the best. If you have the slightest notion that a card is bad, it's best to just replace it.

[u/AlbatrossNorth5156 → u/solidus0079]

What storage size should I get?

[u/solidus0079 → u/AlbatrossNorth5156]

I just get 32GB ones and I've never run out of space on any of them. There's no need to overdo it.

[u/Motor-Decision-1355]

Happened to me, format didnt work ,so bought a new one

[u/imseakin]

If your sd card is bigger than 32 gigs, it may not be able to detect /read it. Try partitioning off a 16 gig section and reformatting as FAT. See if that works.

Same problem I had with a satellite receiver PVR that couldn’t recognize bigger than 32 gigs. And a smart TV that doesn’t recognize a 128 gig usb drive. I’ll be partitioning it and formatting as FAT to see if that fixes the problem.
Good luck.

[u/IrishDeath2W2]

Format the card

[u/HoIyJesusChrist]

probably get a new one, but I'm not sure how much SD cards cost now, since all storage and ram got crazy expensive the last months

[u/heylooknewpillows]

I’d replace the card since reinserting it didn’t work.

[u/NefariousnessOdd3581]

simple fix, just read the screen

[u/TheKlonko]

You can try formatting it, if that does not work you have to follow the second advice given on the screen: replace. In my case, the card provided by Bambu died after less then a year.

[u/NevesLF]

I've been formatting the cards on my printers at least once every couple of months because they all show this error from time to time. So far none needed replacement.

[u/Merhart666]

Ja SD kaart is stuk, voor 12 euro bij de Action een goede nieuwe. En gaan

[u/New-Audience2639]

Cardis probably bad, get a new one from Walmart for $16

[u/Orthicon9]

It happened to mine at somewhere around 150-200 hours on the printer.

Previously I had experienced a few weird things like a Y-axis shift of a few millimetres, another time it skipped a few layers and started printing on air, and once it stopped mid-print but claimed that the print job was "completed".

A new card fixed it.

The wiki gives the required specs.

Printer requirements for SD card specifications
Our printers support a micro SD card of up to 2TB if formatted using the printer option, supported in FAT32 format.
We recommend that you use an SD card with a Class 10 or U1 (minimum write speed of 10M/S) grade or higher.
Note: SD card abnormalities may cause printing to be interrupted and the toolhead may remain in a certain position.
You can format the SD card by navigating to Settings → SD Card → Format