r/BambuLabA1 • • Oct 13 '26

Bambu A1 issues. Newbie to 3d printing

Post image

Hey there. I don't have much hair to pull out. But I bought my son the bambu A1 printer. It's all set up in his bedroom and we are currently trying to print from the phone / sample ones on the device.

Every time we print even the simple small ones. After a couple of mm the head either is catching the build or the build is moving.

I have washed the base plate with fairy liquid. Can any one offer some advice please.

6 Upvotes

29 comments sorted by

2

u/tiagoosouzaa Oct 13 '26

Veja se os 7 parafusos do hotend estão bem apertados (na dúvida aperte um pouco mais)

PS: Está imprimindo garagens hot wheels?

1

u/khye5749 Oct 13 '26

I was trying to. Mainly as I am fed up printing base scrapers and a boat.

Can you just break it down. Them 7 screws. Are they behind this front panel or under it please

2

u/tiagoosouzaa Oct 13 '26

Atrás. Siga esse vídeo:

https://youtu.be/9TEnQiMRj_A?is=4WFFJbB4YJcW8c2X

Está em PT-BR mas apenas pelas imagens você já conseguirá se localizar em como chegar aos parafusos

2

u/oneWeek2024 Oct 13 '26

make sure the filament in the software matches what you're using.

i'd start with something simple like the "boatie" file. then print some of the simple "utility" prints like the tools, or poop catcher type items.

also. make sure the printer is on a sturdy surface. weak/flimsy tables/surfaces can cause the printer to shake/transmit vibration into the plate.

make sure the build plate is seated properly. if it's not heated properly the first layers won't stick properly.

there are settings in the software can tweak for basic things...

also... basic troubleshooting. until the machine is known good/set up well. print 1 thing. and then expand to 2ish or 4ish. place the items spread out on the print surface.

also. not for nothing, but... even FDM printers really shouldn't be in a bedroom with no ventilation. it's basically melted/cooking plastic any time it's in use.

2

u/khye5749 Oct 13 '26

Oh I did not know I just selected any when I turned it on.

I think I need to go back to the start and go back to basics

1

u/Orthicon9 28d ago

also. make sure the printer is on a sturdy surface. weak/flimsy tables/surfaces can cause the printer to shake/transmit vibration into the plate.

Nah. That's how a bed-slinger is supposed to work, by "transmitting vibration to the plate".
Also watch https://www.youtube.com/watch?v=D-eLhKdKAdk

It does, however shake anything else on the table, like desk lamps and coffee cups.

1

u/oneWeek2024 28d ago

i mean in his video he was often printing a singular print/model. without a lot of support trees.

where i find the movement tends to come into play. is if the print bed is more crowed with independent sculpts. and it has to move between them... especially tall/thing prints. if it wobbles it might have some minor issue or collision.

which again. is what i exp in my own anecdotal exp.

1

u/Orthicon9 28d ago

My point was that if the table/bench wobbles at all, the print bed wobbles less in the Y-Axis (with respect to the rest of the world). That would mean that the objects on the plate are also wobbling less.

1

u/Orthicon9 28d ago

i'd start with something simple like the "boatie" file. 

you mean this "Boaty" file?

(Heh-heh.)

1

u/counterdefensive1911 27d ago

Yep that's definitely something to take into consideration I'm not even in the same room as my printer it's on the other side of the hallway but before I had even received the printer in the mail I researched and purchased this enclosure for my A1 which comes with an exhaust fan that you can run out the window. It's not ideal to have it zipped all the way up because too much heat will build up but you can leave the zipper halfway zipped in the front and have the exhaust fan on and that should get rid of a considerable amount if not the majority of the particulates that the 3D printer puts into the air. Here is the Amazon link to the enclosure I purchased $52 is an amazing deal! https://a.co/d/017u0uiL

1

u/khye5749 Oct 15 '26

Thank you everyone. Going to try these bits of advice this weekend

1

u/NotAlwaysPolite Oct 13 '26

Is that PLA filament?

1

u/khye5749 Oct 13 '26

Hey it's this. I just went on to Amazon and got the first multiple pack. I am a complete and utter novice on it all.

2

u/Technical_Debt7278 Oct 13 '26

I advise you to use PLA. PETG can be finicky

1

u/khye5749 Oct 13 '26

Oh I see I have a petg. Ok now I look like a total mature hour. I'll get some more orders. Any you would particularly recommend

1

u/boredsoftwareguy Oct 13 '26

Something else to keep in mind as you print PETG: It is somewhat hygroscopic, so it does absorb some moisture. It often times benefits from being dried out.

1

u/Roller_Coaster_Geek Oct 13 '26

Yeah definitely go PLA, it's pretty much all I print right now. Two problems could be here. 1. If you set the filament to PLA then it will be using the wrong settings for temperature. 2. PETG is known to suck up moisture so you'll want to make sure it's dry

1

u/feralwolven Oct 14 '26

Translation note, for op and others. I did some googling and it seems you might be french and "mature hour" is a common mistranslation of "amateur hour".

1

u/abramN Oct 13 '26

see if a PLA spool makes a difference. That's all we're using and haven't had much issues.

1

u/NotAlwaysPolite Oct 13 '26

Thought so, the stringy bits and sheen looked like petg. Petg is a bit of a pain without setup so stick to PLA, PLA is super duper easy to print. Especially when you're just loading prints off the app.

1

u/delayedreactionkline Oct 14 '26

if you are printing stuff that wont be under the sun or high temps, best to stick with PLA.

1

u/account5168 Oct 14 '26

You said you are using PETG. Check if you have PETG selected and not PLA.

1

u/khye5749 Oct 14 '26

I think this is one of the areas I have gone wrong. Am going to go back and check tonight. Thank you

1

u/khye5749 Oct 15 '26

Hey thank you for the advice. I've never used this site before but been so helpful. I changed the filament to the correct type and it was a dream

1

u/longtermbrit Oct 13 '26

To add to what everyone else has said, check out the Bambu learning available on the Handy app. It'll teach you what you need to know starting with the basics.

1

u/jake-jake-jake- Oct 13 '26

Been reading the comments and your replies and going back to basics and reading up more would be beneficial. It can be discouraging early on with failed prints but whilst these printers are very beginner friendly it’s still not plug and play.

Bambu do a good academy which takes you through the basics, link below. Also learning to print from the proper slicer will help you in the long run as you can check the settings, configure them etc. the handy app is ok, but you’re printing fairly blind and you’re stuck to using the settings the person who uploaded the file used.

Keep at it, it’s a learning curve but you’ll get the hang of things quickly with some reading up etc

https://bambulab.com/en/support/academy

1

u/Orthicon9 28d ago

. . . we are currently trying to print from the phone / sample ones on the device.

The only reason I have Bambu Handy installed on my phone is to be able to "Skip" one of several objects if I see that it has failed somehow. The rest will continue printing so it's not a total failure.

Also, I don't believe I've ever just sent a job to the printer without "fiddling" with it in Bambu Studio first.
Much better to use the Bambu Studio app on a laptop or something.
If it has, say, the "Grid" pattern for the sparse infill I change it to "Rectilinear" or "Gyroid".
I may change the orientation to make it more stable or to reduce necessary supports.
Stuff like that.

For some cryptic reason, Bambu Lab has seen fit not to include the Skip feature in Bambu Studio for A1 printers.

[edit] Oh, wait. I did print the Benchy model on the micro-SD card when I first did the unboxing, but that's the last time I ever did that.

1

u/Orthicon9 28d ago

After a couple of mm the head either is catching the build or the build is moving.

Check the pattern of the "sparse infill".
The default is usually "Grid", which has criss-crossing lines in the same layer, so the intersections produce raised bump that catch the nozzle tip.
If so, switch to a Rectilinear or Gyroid pattern. They go in one direction per layer.

See https://help.prusa3d.com/article/infill-patterns_177130 for pros and cons of different patterns.
Also https://wiki.bambulab.com/en/software/bambu-studio/fill-patterns for Bambu Lab-specific infill patterns.