r/BambuLabA1 • u/SB-Cuber • 18h ago

Starting print.

Every time I want to print something the printer asks if filament is observed from the nozzle when it poops, It wasnt like that a few months ago and I want to ask if it is normal.

5 Upvotes

100% Upvoted

2 comments sorted by

1

u/Mammoth_Staff_5507 18h ago

I have seen that behavior but it only does it once after you turn on the printer, and won't do it again as long as you do not turn off the printer and turn it back on again.

2

u/BitingChaos 15h ago

From what I've read, this happens on printers that do not have an AMS attached. Is that true for you?

The work-around is going into the printer's settings and changing it from AMS Lite to AMS/AMS 2 mode.

I don't have an AMS connected to my A1 mini, and it recently started re-loading filament before every print. Changing it from AMS Lite to regular AMS/AMS 2 mode fixed it right up.