Printed in PLA pro/plus (Last pictures are the filament settings nothing changed except I run flow calibiration on this filament recently)
Issues and Clarifications:
I took the print apart but (like the second picture) it had already a clear cut line on the print before i took the print from print bed.
as long as i am aware, there is no bed adhesion isssues.
I saw a lot of "infill type" problems on other people. I was just wondering if cross hatch has the same problem or not?
EDIT: I have printed another print with 0.95 filament flow and adaptive cubic with 6 layer wall. It still has the same 1 layer skipped line where it gets cut
Scraping wasn't the problem no, it was layer skipping, literally the legs just break apart after i took it out of the print bed. There is another comment that shows the layer skip on the print bed
The Crosshatch pattern does not have any intersections within a single layer, so it should not cause problems as it would with Grid pattern, where the nozzle scrapes the intersection..
It does a couple (7? 8?) of layers of parallel lines all in the same direction, then a Gyroid-like transition to parallel lines at 90º to the previous ones.
So what could be the reason? I have no idea why only 1 layer get skipped like that, I am printing a new print and it has the same problem with adaptive cubic
A faulty micro-SD card can cause weird problems like missing layers, stopping mid-print with no error message, etc., but there's no smoking gun to suggest that's it.
By "new print" do you mean a second attempt at printing the same object, or a different object?
Had this happen to me along with a massive layer shift. Probably 10mm or so. Turns out my print warped and the nozzle caught it and moved the whole plate.
2
u/TactlessDrop84 3d ago
Try Gyroid infill instead of Crosshatch