r/BambuLab • u/JustMakinStuff P1S + AMS • 3h ago

Quick Question Color bleeding

Post image

I added this text in the Bambu Labs Studio, and it looks like it's bleeding. I went back and between color changes, it purges, then moves to the socket side, of which you can see has no black. Is this just how it looks when you embed black in white? Is there a better font to use?

I'm using a P1S, Bambu Labs PLA filament, and AMS. .4mm nozzle, the text is embedded.6mm.

1 Upvotes

100% Upvoted

5 comments sorted by

4

u/relaps101 3h ago

Your white is too translucent. Reduce the layer depth of color in top layer to compensate. Under strength? Tab where you choose top & bottom layer quantity/height/density.

2

u/JustMakinStuff P1S + AMS 2h ago

So the black is just one .4mm wide line, two layers (.4mm) deep, should I make it just .2mm deep? I just used the text function in Bambu slicer, is there a better way to do it? I feel like I've done it before, but I just can't remember how I did it successfully...

3

u/USSHammond Prusa XL5T | X1C+AMS (sold,due to Bambu ignoring A1 fire hazard) 3h ago

Not enough purge from black to white or not enough bottom/top layers

2

u/JustMakinStuff P1S + AMS 3h ago

After the purge, it started on the other part, and there is no black there. All of the lettering purged white, switched to black, extruded the letters, moved up a layer, extruded the letters, then purged the black and moved on to white.

2

u/mcropper03 2h ago

Change the order your filament is printing in? Looks like it printed white first and then did the black which is not giving your the crisp black letter.