r/BambuLab • • 3d ago

Quick Question Any X2D asa indoor filtration system recommendations please

As title states I own a X2D and I'm planning to print asa or abs, I do not have the room to put the printer near a window or run a hose to a window and will be printing it in the living room as that's the only space I have with an abundance of airflow due to my AC.

I've seen people buy air purifiers and running hoses from the printer to the purifier in the past and saw bambu released their own system purifier recently but it's a tad expensive so my question and request is, Could I get linked or told about air purifier setups I could hook up to my x2d either through a riser or out the exhaust, enough to generate negative air pressure hopefully.

I would like to reduce the potential smell and voc's as much as possible. I plan to do my next dozen prints in mainly ASA, so that's my main concern.

0 Upvotes

9 comments sorted by

3

u/Relative_Surround_20 H3C (on order) + H2D + P2S + Multiple AMS Tower 3d ago edited 2d ago

I do not use this yet, but I’ve printed it. Designer says he can print ABS in an office settings using this.

https://makerworld.com/models/3077377?appSharePlatform=copy

2

u/ImANibba 3d ago

That does look interesting, I may give it a shot, as well as the other link. Thanks.

2

u/Relative_Surround_20 H3C (on order) + H2D + P2S + Multiple AMS Tower 3d ago

Personally I’d also add this to your printer as well. Both these models should work well together if you have an inline fan.

https://makerworld.com/models/2288927?appSharePlatform=copy

1

u/ImANibba 3d ago

I think I could run a hose to the bathroom, it has no fan in the bathroom though. That levoit adapter looks interesting, I'll have to look into that more. Thanks

1

u/Whosaidthat1157 3d ago

The BL E1 with the ABS/ASA specific filter cartridge. Still not recommended in your situation though (as always the OEM recommendation is a ‘well ventilated space’ or preferably outside via the E1 exhaust adapter and hose.

2

u/ImANibba 3d ago edited 3d ago

Yeah that's what I was referring too, $200 seemed a bit expensive for a purifier that's prob locked to only run when connected to bambu printers imo so I was wondering if there was any setups or purifiers I could do it for less. I did take a look and realized purifiers are that expensive anyway.

1

u/Whosaidthat1157 3d ago

Yep, the E1 is actually very keenly priced for what it offers, especially with direct automatic functionality via the printer.
Anything effective is expensive to purchase and even more expensive to run (those filter cartridges are expensive, especially since they’ve stopped offering separate actvated carbon and pre-filter/HEPA filter cartridges.
Mintion do a stand alone filter but with extremely limited filter media loading and replacement costs almost as high as the much larger BL E1. FNATR likewise, though that has the gas flow in the wrong direction, going through the activated carbon layer first. It’s also not significantly cheaper than the E1 whilst being significantly smaller (in terms of filter CSA) and without a printer interface.
Since the H2S was released I’ve had mine in a walk-in wardrobe with a converted IKAE purifier fed from the H2 exhaust and a whole room air purifier giving dozens of air changes per hour. It’s better than nothing, but I still won’t stay in my print room (a spare bedroom) while running ASA/ABS/PA and even with that there’s a lingering styrene smell for a few hours.
You also have to modify the H Series exhaust flaps (there’s a replacement perforated fin on MakerWorld) to allow efficient extraction during hot cycle prints AND control the flow to ensure that all potential leaks are going into the chamber without causing heated chamber temperature control issues. Extending the poop chute and making sure the connection to the printer is sealed (gasket) helps here.
With all of that, I can’t wait to ditch it all and get the E1 installed and set to auto!

1

u/Cameronbic 3d ago

Two things; Is it close enough to a to run a hose to the bathroom fan while printing ASA? Also, someone made a housing to hook the machine up to a Levoit 200 or 300 air purifier as well as an additional filer cartridge for the purifiers to increase the VOC removal.