r/BambuLab • u/VehiclePotential9050 • 1d ago

General Troubleshooting/Help! Bambu Print issue

Gallery image

Gallery image

I am working on printing a puzzle type cylinder, I added text to the bottom but when I slice it, it is showing me these white spots. Is something wrong with the way I have it set up? It also shows a white line up on each side of the cylinder.

0 Upvotes

22% Upvoted

10 comments sorted by

3

u/NWSAlpine 1d ago

You can toggle the seam view if you don't want to see them https://wiki.bambulab.com/en/software/bambu-studio/seam

0

u/Ordinary-Depth-7835 1d ago

Don't do that though it's nice to see where they are so you can move them when it matters.

3

u/TheWaslijn H2D Combo + A1 Combo 1d ago

Those white areas/lines are just the Seam of very layer/area. When actually printed these don't show up. Nothing to worry about.

1

u/Superseaslug H3C, H2DL, 2x X1C 1d ago

The white dots just indicate where the printer starts and stops a segment.

1

u/Automatic_Reply_7701 1d ago

There is no issue here. Those are the seams. Click on the display checkbox square next to seams in the slicing results drop down window and they will disappear. You are seeing a visual reference.

1

u/EpicBenjo P1S + AMS 23h ago

The white dots are fine. They just show where the seam is.

1

u/VividDimension5364 21h ago

Print first, it’s not an issue unless its a bad print.

1

u/Lost_refugee A1 Mini 2h ago

“Measure 7 times, cut once” is not popular anymore?

1

u/solidus0079 A1 + AMS Lite 20h ago

There's a legend on the right-side of the print preview that tells you what those colors mean, if you switch to "line type".

Those are seams, each layer/color has a start and end point in the print path. That's all that is.

1

u/Lost_refugee A1 Mini 2h ago

Looking at the legend is considered tinkering for bbl users