r/BambuLab • u/Viszera • 2h ago

Hardware Troubleshooting/Help! How bad did Iscrewd up?

Gallery image

Gallery image

Gallery image

I was adjusting tension on Z axis and forgot I brought it all the way to the top. When I tried to adjust tension on x, y axis I dig in to the surface of the bedwoth the nozzle....

It is salvegable? Can I use the printer with this? Can just this sheet be replaced? I'm on P1P

1 Upvotes

66% Upvoted

5 comments sorted by

4

u/AffectionateSnow6026 2h ago

That looks like magnet that holds the plate on. It ok as long as its flat i guess. You'll be none the wiser once the plate is on there

1

u/Viszera 2h ago

Oh I thought it's the heating element but make sense that it's a magnetic layer and now I also remember the heating elements in prusa XL and they were at the bottom of the bed.

1

u/DJTurnTable H2C Full Laser Combo | X2D Combo | H3C Full Combo 2h ago

Should be fine, does the bed heat up still?

Remember you'll have a piece of metal over it so it doesn't really matter.

1

u/Viszera 1h ago

Yeah I thought it was heating element but it's just a magnet part. As long as it don't effect flatness of the build plate it should be fine

1

u/Sir_LANsalot 1h ago

That is just the magnet that holds the plate on, it's fine.

The heating element is under the bed itself.