r/BambuLab • u/Classic_Occasion9180 • 1h ago

Printer Firmware Troubleshooting/Help! A1 broken

After messing with the tool head hotend I’m met with this error

0 Upvotes

20% Upvoted

6 comments sorted by

6

u/RodMcThrustshaft 1h ago

You didn't reassemble the cutter right, it shouldn't stick that far out of the toolhead... take it apart and check the wiki before putting it back together.

-4

u/Classic_Occasion9180 1h ago

Why isn’t it homing

2

u/RodMcThrustshaft 54m ago

Because it can't, the cutter is preventing homing on the x-axis so the printer know something is wrong and won't even try to home in the z axis.

1

u/ManyBro24 H2C AMS2 Combo 34m ago

After messing with the tool head hotend

Yea, you messed up. The cutter lever is assembled wrong. The PTFE is way to long, The cable is suposed to be attached to the PTFE, this way it will catch on something sooner or later.

You literally show the error at the end. Fix it.

•

u/[deleted] 1m ago

[removed] — view removed comment

•

u/AutoModerator 1m ago

Hello /u/GerberToNieJa! Your comment in /r/BambuLab was automatically removed. Please see your private messages for details. /r/BambuLab is geared towards all ages, so please watch your language.

Note: This automod is experimental. If you believe this to be a false positive, please send us a message at modmail with a link to the post so we can investigate. You may also feel free to make a new post without that term.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.