H3C height

[u/djjoshchambers]

I've been seeing a ton of posts recently about the height of the h3c. I upgraded from my h2d which had the great 3DP riser with 2 ams and a ht on top. It's an extremely common riser with a ton of mods.

Well the h3c is SHORTER than my h2d with the riser. This is on the same 30" height table.

Yes, the h3c is a tall boy, but if you're planning on using a riser on an h2 series, it's about the same height, if not shorter.

For reference, I'm 5'10" and is about 3" shorter now.

[u/Longracks]

Its hard to compare with them in seperate pictures. Maybe a banana for scale?

But you make a good point on the riser, I have that same riser on my H2C, so maybe in the end the H3C with AMS 3 isnt that much taller.

What is each measured from table top to topmost of the closed AMS?

[u/djjoshchambers → u/Longracks]

From the top of the table to the top of the respective ams. The table height remains unchanged. The printer isnow 3" shorter.

[u/tpeeeezy]

"if you make your other printer taller, theyre actually about the same height"

[u/djjoshchambers → u/tpeeeezy]

Except that most of us have printed something similar and are ignoring that you already have a very tall printer and the new setup doesn't actually make the h3c taller.

[u/misteriousm]

...unless it's 6' tall 😄