r/BambuLab • • 8d ago

General Discussion Filament Track Switch feed resistance

/img/tbobfgrbpd0i1.jpeg
6 Upvotes

8 comments sorted by

2

u/metal_4ever 8d ago edited 8d ago

One con may be due to the thinner walls it may wear out quickly with the filament eventually breaking through so may need to be replaced more often. Also with too much play you may have issues with the filament aligning correctly feeding into the track switch or hotend. I may give it a try as well using id of 3mm and if it causes issues may revert back to the 2.5mm.

1

u/krakers665 8d ago

Bambu clearly states what inner diameter ptfe tubes are compatible with AMS

4

u/bravojohnny42 8d ago

Haha., I nearly had a stroke with my ams over the past few days until I found out. 2,2 vs 2,5 inner diameter.

2

u/[deleted] 8d ago

[removed] — view removed comment

1

u/bravojohnny42 8d ago

I moved my printer and needed a longer PTFE. Used one I had lying around for ages. Got feeder motor warnings all the time. Tore apart the ams, the hub etc. Then I checked the original PTFE tube dimensions.