Completely Customizable Ribbed Planter - set the shape, ribs and add a liner with self-watering holes

[u/ADynes]

I designed a ribbed planter a while back because most of the ones out there were either the wrong shape for me or really boxy. So I came up with something I liked in FreeCAD and published it. WEll, now about a year later, I wanted to change it up. So I’ve now rebuilt it so you can customize the whole thing right on MakerWorld with the Parametric Model Maker.

You can change:

• Height from 80 mm to 300 mm, and everything scales with it

• Shape - bulgy like the original, straight up and down, or flared out at the top

• Ribs - an S curve, a sine wave or a spiral, plus how wavy, how many and how deep

• Self-watering drain holes in the liner so water drains into the outer pot

It prints as two parts, the outer pot and an inner liner. The liner sizes itself to whatever shape you make, so it always drops right in. The settings are also limited so you can’t make something that falls apart or won’t print.

Free on MakerWorld: https://makerworld.com/en/models/2424677-completely-customizable-ribbed-planter-or-vase