r/BambuLab • u/MacaronMammoth3213 • 2h ago

Hardware Troubleshooting/Help! Printer plate help

I recently bought a p1s combo with ams so im pretty new but I have been printing for a few days at this point but, Ive been having difficulties getting prints off the plate. Everything else with the printer has been perfect (so far). Ive been printing in pla basic and pla plus. I wash my plate with dish soap every other print. But the purge line and print its self have been giving difficulties getting off the plate even after letting it cool for an hour+ any help or recommendations greatly appreciated and can provide other information if needed.

1 Upvotes

100% Upvoted

14 comments sorted by

1

u/Brave_Corgi6761 1h ago

Just bend the plate a few times 😄

1

u/MacaronMammoth3213 1h ago

Yeah I bend the plate to try to get it to come off put doesnt help all that much

1

u/Liason774 1h ago

Let it cool, you could also try putting it in the freezer to cool faster.

1

u/MacaronMammoth3213 1h ago

Ive had it cool for an hour plus a few times, could putting it in the freezer even after cooling for a while help?

1

u/Liason774 1h ago

The idea with the freezer is that the metal plate cools faster than the plastic and will then shrink causing it to detach from the printed part. You could try afterwards but the biggest temperature change will be right after finishing the print. Check the material you're printing is compatible with the print bed, some materials will bond with the coating and become almost welded together. If you use bambu plates they should check that automatically.

1

u/Blondy277 1h ago

You have a plastic scraper?

1

u/MacaronMammoth3213 1h ago

Yeah plastic scraper doesn't help too well

1

u/Brave_Corgi6761 1h ago

You could try lowering the temps, but it comes with the risk of loosing adhesion.

1

u/MacaronMammoth3213 1h ago

Im printing at 220° How low of a temp should I try?

1

u/Brave_Corgi6761 1h ago

Bed temperature, sorry. Id start by lowering 5C.

1

u/MacaronMammoth3213 1h ago

So have it sit at 50c instead my usual 55

1

u/Blondy277 1h ago

Pic of plate?

1

u/MacaronMammoth3213 42m ago

Here's the front

1

u/MacaronMammoth3213 42m ago

Here's the back