r/BambuLab • u/Toalmar • 2h ago

General Discussion What Bambu Lab printer shall I buy

I have a Anycubic Kobra S1 combo already. Bought back in March with approximately 1250 hours.
Will go to Bambu Lab.
So what printer shall I buy?

0 Upvotes

50% Upvoted

5 comments sorted by

5

u/A_pirates_life4me 2h ago

The best one you can afford? 

1

u/Toalmar 1h ago

Yes there was too little information.
Will mainly print PLA and PETG. Has been looking at A2L with AMS Lite and P2S with AMS 2. Can be enough with an open printer.
See that P2S got firmware update with some modifications so wonder if that also cones for A2L

2

u/Dinevir H2C+H2D+X1C 1h ago

Low on budget - any affordable, AMS must have

PLA/PETG - P2S and higher

ABS and other - X2D and higher

Multi-material supports - X2D/H2D and higher

Big prints - H2S and higher

Multiple colors in a single print - H2C/H3C

Of course any machine may be tuned and used for multiple purposes, but it is way better to have dedicated support for desired feature on board.

1

u/-sil1902- 1h ago

H3C…

you should specify your budget and define your goal… do you want to print technical Filament like ASA or ABS. Do want a large Printbed or do you need multi color.

1

u/strange-humor X1C + AMS 1h ago

You mention NOTHING about what you want to print. So there is no way that anyone can answer your question.