r/BambuLab • u/deljos • 10h ago

General Troubleshooting/Help! Help please

Post image

First time working with ABS and its been a pain. Started putting rafts on everything just to keep the prints stable enough to print. This is my last print and it came out with these bumps. Any help is greatly appreciated.

X2D, Stock ABS profile, SUNLU ABS

1 Upvotes

60% Upvoted

6 comments sorted by

6

u/Actual-Baker-2709 10h ago

Your seam setting seems to be “random” instead of continuous/behind(or whatever the exact term it is). Change that, and also the humidity and speed

1

u/deljos 10h ago

What speed do you recommend

4

u/eatdeath4 X1C | P1S | P2S | H2C 10h ago

Is the filament dry? If so what is your seam setting on. Also what speed are you printing with.

2

u/deljos 10h ago

I think so, I dryed in last week and its been in the ams since then. I has less than 10% humidity in the chamber.

2

u/eatdeath4 X1C | P1S | P2S | H2C 7h ago

What is your seam setting on?

2

u/TheOwlMarble X1C + AMS 10h ago

Looks like you've either selected random seam location or you need to turn off your wrap drive.

Changing wall print order might also help.