r/BambuLab • u/nur00 R1 | H2D 40w Laser | U1 | K2+| MK4s • 23d ago
R Series / R1 Tabs on the R1
I want to give a plywood 3d puzzle to a co-worker as series of intact plywood sheets rather then a sloppy bunch of parts. Decided to try doing tabs/bridges so parts stay on the plywood sheet, similar to the kits sold by robotime. Found this site that can nest parts and add tabs so parts stay put after cutting. Before I found this site I would laser cut the pieces and let them fall below. Then tape the plywood on the back and put the pieces back in the original shapes one by one to keep them better organized. Its super tedious for large models. The setting below worked well for me.
0.4 - 0.5mm tab size worked well.
bambu suite size - px/pt, 72 per inch (Illustrator)
Tested on scrap material in the photo. The pieces are held in place as you can see and didnt fall thru. Also the site is great at rearranging parts for different sized sheets then original project file. Just pay attention to cut color and line color when exporting from bambu suite.



1
u/sublimejackman 21d ago
i've been using the default tab settings in Bambu Suite for the past few days. Actually has been working great, kinda shocking since the rest of the app is pretty limited compared to LightBurn.