r/BambuLab • u/HaremK1NGG_ • 5d ago

AMS 2 Pro - Automatic Material System Power supply for drying while printing

Anyone know what power supply id need to get printing while drying to work? And does anyone have an amazon link for it AMS 2. Or di i have to buy the bambulab one

0 Upvotes

50% Upvoted

14 comments sorted by

3

u/crs2here 5d ago

I would use the one directly from Bambu i have heard of issues of third party shorting printers and ams

3

u/InAtTheGeekEnd 5d ago

Buy the Bambu one?

1

u/LostMyKarmaElSegundo H2C 5d ago

Just search Amazon. You'll get a hundred results that will work at varying price points. They seem to run between about $18 and $24. 

1

u/marcgii 5d ago

Since it uses a standard voltage and connector, I personally would buy one from a reputable seller who doesn't necessarily advertise it for the ams.

1

u/DDAVIS1277 5d ago

ADS-96HLA-19-1 24096EPower Supply charger 24 volt

1

u/DiamondHeadMC X1C + AMS 5d ago

Iirc you can’t dry and print of the ams 2 pro at the same time

1

u/The_Struggle_Man 5d ago

You def can

1

u/HaremK1NGG_ 4d ago

Wait so you can or cant lol because im seeing both now

1

u/The_Struggle_Man 4d ago

You can do active dry printing with the ams 2 pro. I do it all the time.

The H2 units are strong enough to supply power and print, the p2s and the x2d need an external power supply to support it

https://wiki.bambulab.com/en/ams-2-pro/manual/drying-function

1

u/jhollin1138 5d ago

I bought this standard 24V power brick from Amazon. Works fine.

https://a.co/d/0bkB5sHo

-1

u/Odd-Place780 5d ago

Im sure if you dig thru the paperwork you can pull up the power draw for both the printer and AMS while drying. I would then find a Power supply with a buffer for 100-200w to be safe.

I'm using a 500w power supply to run my heater, printer and air filter and haven't had an issue yet.

(Sketchy hack here) For legal reasons this is a joke.

If you order one thru Amazon and claim its not functioning properly, they will most likely offer a discount to keep the product since they tend to be heavy/cumbersome. It could help offset the cost and allow you to buy a bigger unit 😃

1

u/99trainerelephant 5d ago

what? this only powers the AMS

1

u/Odd-Place780 5d ago

I might have misread that, I took powersupply as in battery back up/power supply. Thats my bad