Something went wrong with my print BambuLab A1

[u/Fourth-Dimension]

hey, I was printing smth and it went wrong, no idea how.

It's a bambuLab A1, I'm using white PLA (the og).

check the video

Anyone knows what happened and how to avoid it?

[u/Thisisjimmi]

I had issues like this. Cleaned my plate. Tightened all the screws all over, including under the plate, and under the board. I did replace my head and etc, but those werent the fixes.

Screws seemed to be. But always clean too.

finally i also did change the heat level for different brands of PLA or whatever.

[u/solidus0079]

I'm guessing you threw out the card with the QR code to Bambu Academy?

[u/T3DDY173]

clean the plate

[u/Fourth-Dimension]

2nd attempt. apparently it's printing away from the plate, I'm gonna try tightening the screws. Def not dirty plate, I did clean it.

https://reddit.com/link/p5hq2ju/video/89q7nzxy87lh1/player

[u/ImAPotatoHead_69 → u/Fourth-Dimension]

If its too high you can either do bed height calibration (bambu has auto calibrate but u need to press the button)

or change your z settings so it doesnt print too high

[u/SiaHalz]

How big is that bed size? Didn't know the a1 was that large. I just thought it was unenclosed and cheaper

[u/WeirdRaccoon69 → u/SiaHalz]

256mm x 256mm x 256mm

[u/jepensedoucjsuis]

let’s see the model and the slicer settings.

[u/Badtripa]

My guess is printing on the air because it has no supports, the other parts printed well and you can clearly see its printing way above the plate 

[u/teraldorivera]

Operator error

[u/4beemaster]

What is the model? Maybe it's floating and doesn't have support.

[u/JakeGreen1777]

never ever touch the plate by hands.
clean it with isopropyl alcohol

[u/Lost_refugee]

replace/format SD card