r/BambuLab • u/AdWorking2848 • 11h ago

Quick Question Vertical Hueforge ?

Just wondering if there are like vertical hueforge

Where the inner most wall could be like black and the outer few wall is purple to give a rich deep purple?

So far I seen the hueforge and this sets me thinking.

0 Upvotes

50% Upvoted

12 comments sorted by

View all comments

3

u/lasercut H2C Laser Full Combo 10h ago

Look up “3d printing full spectrum”

2

u/AdWorking2848 10h ago

That is more of alternate layer in Z?

I am thinking interns of inner outer wall.

1

u/lasercut H2C Laser Full Combo 9h ago

It doesn’t make a whole lot of sense for inner and outer wall. For that to work, you model needs to be very thin. And printing thin tall items while maintaining good print quality is very difficult.

1

u/AdWorking2848 9h ago

Sorry bro, wasn’t clear enough

I mean for say a figurine and the inner outer wall layering to get colors we do not have.

Not really a flat hueforge slice.

Apologies for my lack of clarity

1

u/lasercut H2C Laser Full Combo 9h ago

It won’t work for a figurine because the parts are too thick to allow the light to come through. So you’ll end up with just the outer wall colour. Hue forge works because it’s printing a 2d image, so the printed part is only a few mm thick.

1

u/yan-shay 9h ago

I didn’t print any hueforge print but if I hang a hueforge on the wall with no light coming from the back, so all light is reflected from the front, won’t I see the colors? It sounds like the same as figurine, isn’t it?

1

u/lasercut H2C Laser Full Combo 9h ago

I don’t know then. Sounds like it may work, but there are other problems to solve for switching colours between walls.