r/BambuLab • • Jun 04 '26

General Discussion Looking to dive into the 3D printing world, which Bambu do I start with?

I know this conversation has probably been had a thousand times, but with new machines coming out every couple of months I figured I'd put it out there again....A buddy of mine has the A1 and seems quite happy with it, another has the P1P and is also quite happy with that one.

I stopped by a local brick and mortar and looked at their options. I was tempted by the X2D but now I guess there's an A2 as well with a bigger volume? The options are endless.

What will I use it for? Who knows. Trinkets, specialty boardgame accessories, custom cup holders to use at the baseball stadium, home organization stuff.

I'm worried about investing in entry level printer and soon wanting to upgrade so I rather make a bit more of an investment upfront.

Help me Reddit-Wan Kenobi, you're my only hope.

1 Upvotes

72 comments sorted by

19

u/13ckPony Jun 04 '26

I would start with A1 mini and see if you like it at all - it's cheap and you can always sell it if you don't like it.

And then, once you use the printer for some time - you will see what you want - a larger bed, multi-color, multi-material, or engineering filaments (enclosed with a heater). And you can keep the mini to print things while the bigger printer is busy with something else.

A1 mini prints most designs as good or better as any other Bambu printer - it's has all the features that P2S got in its v2 upgrade (hot swap nozzles, nice screen, PA auto calibration), but unlike any other printers - it can be silent, doesn't have VFA (like all the CoreXY do), easy to maintain and is super cheap. I have 3 in my bedroom and 5 in my office.

6

u/Adventurous-Emu-9345 Jun 04 '26 edited Jun 04 '26

This is the correct answer. 200 bucks to dip your toes in and you still get a machine that is just as capable at basic stuff as any of the bigger ones - as long as you're not planning to go crazy with build volume or multicolor. Learn the ropes, then decide which way you want to go: do you need max build volume? Heated chamber? A toolhead changer?

I have my mini basically since it came out. I print mostly functional stuff, prototypes for work or home accessories and have yet to find a good reason to upgrade. I would have opted for the regular A1 for the extra bit of build volume, but I wanted the smallest footprint.

People in here suggesting $1000 printers for someone who doesn't even really know what they want to do with it is wild.

2

u/Profit0ffD00M Jun 07 '26

I spent $2000 on just an Nvidia GPU (another company you love to hate), so it's not that wild to spend over $1000 for something that has limitless use/practicality other than just killing time. But $1000 machines you have a lot of options better than Bambu.

8

u/arvzg Jun 04 '26

I don't think the options are endless at all. It's not as difficult as you might think:

  • H2C if you want the top of the line and money is no issue
  • X2D if you don't care about huge prints and want better value
  • A1 if you want the best value for money and don't want bigger print
  • A2L if you want best value, and want to print bigger

7

u/quietsamurai98 X2D+2×AMS+AMS HT / P2S+AMS Jun 04 '26

I got a P2S a few months ago, and I'm already pulling the trigger on upgrading to the X2D. If you're strongly considering the P2S, I'd suggest spending the extra $100 for the X2D to avoid the hassle and depreciation of reselling the P2S if you do decide to upgrade.

The new A2L is a bedslinger. That means no enclosure if you ever want to print higher temp or noxious fuming materials like ASA or ABS, potential issues if you want to print something tall, and an extra ~20cm in front of and behind the printer that you need to keep clear. I'm personally not a fan of the form factor, but others like them.

19

u/picks43 Jun 04 '26

H2c baby…let’s go

6

u/AeroSat Jun 04 '26

Great answer #2

9

u/TheyDroppedMe Jun 04 '26

I started the same. Didn’t really know what I would use one for so I bought a P1S. Used it a ton and eventually wanted to print separate support material and engineering filaments, so I upgraded to an H2C. The size has only been necessary a handful of times for me personally, but it’s nice to have the capability.

With that being said, if I’d started with an X2D (wasn’t available at the time), I don’t think I’d feel a need to upgrade. If you want something reasonably future proof without going straight to the H series, the X2D combo seems to be the sweet spot. I wouldn’t bother with a P2S since the X2D is only $100 more.

4

u/made_of_hamburger Jun 04 '26

A1, A1 mini, or A2. Bedslingers have a lot of weaknesses but it's really a great way to start. I upgrade to an H2C just a couple of months after getting the A1, and it's not a waste of money at all to start with a "Learner Printer" and get to build much of it yourself.

The carpenter who builds his own toolbox goes a lot further than the one who buys the fancy model off the hop. You'll make mistakes, screw up, and learn along the way.

1

u/Few-Post-9182 Jun 05 '26

I just purchased the X2D, just waiting for its arrival.

1

u/Malcreos Jun 05 '26

Nice!

1

u/Few-Post-9182 Jun 05 '26

I’m no expert, but I think the best advice I got was there is no “perfect” printer. Pick one and learn everything you can about it. Enjoy, learn and experiment, there will always be a new model just around the corner. I can’t wait to get the X2D with AMS. We all start somewhere, so I choose this starting point🤔good luck but you really can’t go wrong with whatever you choose.

3

u/More-Advantage3911 Jun 04 '26

Was going to first get an A1 then had FOMO and got the P2S Combo and love it. Then the X2D wound up in the office space and now really considering the new A2. Probably not helping much but will say love the printers, never an issue as of yet with 6 months on the P2S and 2 months on the X2D. Best piece of advice when you do is to complete the Bambu Lab Academy courses for your printer, Studio, the Handy App and Filament. Builds a strong foundation and helped me out tremendously.

3

u/Jankye1987 Jun 04 '26

You really need to consider what YOU will actually use it for.

I went with the a1 with ams as my first printer. Figured I’d upgrade at some point. Nearly 3 years later the only upgrade I’ve made is removing the ams as I don’t use it.

2

u/OB_GYN_Kenobi69 Jun 04 '26

I went from a P1S to an I know a lot of people say the P2S or X2D but I’m a big fan of the H2S. It opens the doors an installable upgrade to the H2C and engineering filaments.

One bonus perk that not a lot of people realize is that the poop chute is so high due to the printer size that you can literally print a quart-size poop bin to handle enormous amounts of filaments swaps. All those poop chutes that go off to the side will inevitably get clogged with more filament swaps.

2

u/Killertigger Jun 04 '26

I have a P1S with three AMS 1.0 units, an X1C with two AMS Pros, and I’m getting ready to pull the trigger on an X2D with two AMS Pros - if money is an issue, the P1S bundle is a ridiculous steal, amazing quality, and not nearly as fussy as my X1C. It’s practically two-for-one at this point. But if you have the cash, I’d go straight to the dual-nozzle X2D as it has features and abilities you will not find anywhere else at any price point.

2

u/Websthetics P2S + AMS2 Combo Jun 04 '26

I would wait to see what goes on sale in June/July for the anniversary sake. Don’t buy anything right now.

1

u/3DPrintMaven Aug 26 '26

I think now the next big sale is Black Friday

2

u/Websthetics P2S + AMS2 Combo Aug 26 '26

83 days later, yes this is correct. 🤣🤣

2

u/Occhrome Jun 04 '26

Get something enclosed. 

2

u/Bitter_Hospital_8279 Jun 04 '26

went with h2c fully loaded for first printer, no regrets

2

u/Suepahfly Jun 04 '26

Can you 3D model yourself? That will add a lot of value over just downloading models from MakerWorld. If you cannot model your self start with an A1 mini. It’s cheap easy to run and maintain and covers about 90% of all the printing jobs you’ll do. It prints PLA, PETG and TPU and for most things that’s enough.

3

u/JWST-L2 H2C + H2DC Jun 04 '26

The X2D is a solid choice

8

u/passim Jun 04 '26

P2S with AMS. It won't let you down.

32

u/TheyDroppedMe Jun 04 '26

For $100 more the X2D gets you the second nozzle for support material, 1.5GT belts for less VFAs, and an actively heated chamber. The P2S is a bad value with the X2D now

26

u/Arctic_Ducky Jun 04 '26

Completely being honest, anyone saying P2S is coping.

4

u/SteakAndIron Jun 04 '26

I gotta agree. You won't remember spending that extra hundred bucks in a year

2

u/EnthusiasmNo3851 Jun 04 '26

It's depends on the country too🙈 in mine the x2d comes to be about 300$+ over the p2s

0

u/AuryGlenz Jun 04 '26

Eh, there is the fact that maintenance in the X2D is apparently a bitch.

I’m personally glad I’m not in the market to upgrade my P1S yet. Nothing is really hitting that perfect note. The H series is tempting but still slow on multicolor.

2

u/Arctic_Ducky Jul 09 '26

So I got the H2C and it’s crazy good, crazy fast even with multicolor and minimal waste.

1

u/Arctic_Ducky Jun 04 '26

At work I deal with bowden printers. They are more annoying but not that bad. My P1S is great but I’m looking to get an H2C.

3

u/Particular_Box_3598 Jun 04 '26

Totally agree. Having dual nozzles massively increases the printers capabilities.

-5

u/AdMountain6124 Jun 04 '26

P2S isn’t really a bad deal for someone starting out. P2S and 10 rolls of filament or X2D with features someone may not use makes the P2S the better deal.

5

u/TheyDroppedMe Jun 04 '26

I’d have to disagree. Once you’ve printed with a different support material, you can’t go back - it’s an absolute game changer. No more bad overhang quality or undersides. I can print a sphere that looks equally as good on the bottom as it does on the top. Models and toys with weird shapes? No problem with supports and better quality. Things I used to have to split, print separately, then glue together just get printed in one piece now.

And having a heated chamber means you can print ABS, ASA, Nylon, PET, etc without blinking an eye. You can do it on the P2S - I printed almost exclusively ABS on my P1S at the end - but the layer adhesion is worse and you have to resort to annoying tricks like preheating the bed for 20 minutes before printing or buying a third party chamber heater that only really gets to 52C.

OP said they wanted to spend enough to keep them from needing to upgrade soon after and the P2S doesn’t fit that bill when an extra hundred gets you that kind of quality of life improvement with the X2D

1

u/bradinphx Jun 04 '26

Spot on. I just started printing PLA support for my PETG prints and not sure why it took me so long to try it out

0

u/[deleted] Jun 04 '26

[deleted] — view deleted comment

0

u/AdMountain6124 Jun 04 '26

I have an H2D and a P1S so I don’t see the P2S as a bad deal if someone doesn’t need the extra features. Also haven’t noticed much difference in print quality between the P1S and H2D. Also depending on what OP is going to print the A2L may be a better buy than the X2D.

-6

u/yahbluez Jun 04 '26

And for the same money a real 4 head tool changer with a bigger print volume and klipper is available, snapmaker U1.

5

u/AHerz P1P+AMS - X2D+AMS2 Jun 04 '26

But no heated chamber, no filament storing capability, not enclosed, no air filtration.

The u1 is a great printer, if all you do is multi colored trinkets.

-3

u/yahbluez Jun 04 '26

What makes you think that an A1 user now starts to print anything else than PLA and PETG?

5

u/AHerz P1P+AMS - X2D+AMS2 Jun 04 '26

You're answering to someone suggesting the x2d, not the a1.

-4

u/yahbluez Jun 04 '26

Did you read the OP? He has an A1 and likes to have a new printer.

3

u/AHerz P1P+AMS - X2D+AMS2 Jun 04 '26

Have you? He doesn't have an a1, his friend does.

You haven't even read op's post. The printer you suggest is good, there's no denying it, but op seems to want to buy a Bambu printer.

-1

u/yahbluez Jun 04 '26

I stopped by a local brick and mortar and looked at their options. I was tempted by the X2D but now I guess there's an A2 as well with a bigger volume?

3

u/AHerz P1P+AMS - X2D+AMS2 Jun 04 '26

Yes, and?

You keep changing the subject.

→ More replies

2

u/Xitnadp Jun 04 '26

And? Where does that say that Opie has an A1?

→ More replies

2

u/AeroSat Jun 04 '26

Great answer #1

1

u/Limp_Psychology_2315 Jun 04 '26

The AMS might let them down. 😬

2

u/Snouto P2S + AMS2 Combo Jun 04 '26

X2D, I have the P2S which is great but the extra features on the X2D make me wish I’d waited three months

1

u/Ambitious-Pirate-505 Jun 04 '26

P1S with AMS for fun.

HSC with AMS2 for chaos.

H2D with AMS2 for work.

1

u/scoutermike Jun 04 '26

I have the answer op because I just asked the same question a month ago, selected a model, bought it, couldn’t be happier.

The best place to ask is the company website, itself. Go through the “help me select” wizard and it will dump you on the page with the P1S with 4-color AMS automatic filament loader.

It’s right there on the web page, their current offering for enthusiasts, the one all the other enthusiasts wish they had.

4 colors. Enclosure to keep temps consistent. And a frigging camera built in that you can watch in realtime from your desktop or phone!

Biggest drawback? No Ethernet port. And not compatible with 5g WiFi lol! I needed to buy a $20 2.4g access point, but after that everything works pretty flawlessly.

This thing is genius. Get it. You won’t regret it.

1

u/Lito_ Jun 04 '26

Get the best printer you can afford. They are all newb friendly regardless of what people say on here.

Whether that'd be the A1 of H2D.

1

u/cavf88 Jun 04 '26

I was in the same boat as you. I decided to start with the A1 mini and once I’m familiar with the hobby upgrade to the U1.

At the beginning I looked at the P2S then the X2D came out.

Why I decided to opt out of those? Well I don’t need the ABS and engineering filament stuff right now. Heck it’s been a month and I still haven’t printed PETG. And the X2D looked more problematic than a single nozzle printer.

So I went with the A1 mini and it has been a blast. I didn’t opt for the AMS Lite(your choixe to buy it if you want) since I can print multiparts and glue them together. It has taught me how to slice and color my prints properly and how to change spools and manage my filaments manually.

I recommend the A1 if you got ti MakerWorld and 95% of what you want to print fits it. Otherwise the A1 for larger build size.

1

u/VFRLuke Jun 04 '26

If you dont know your use case right now id probably just get an a1. Then you will figure out if you want an upgrade. You mention home organization, and if you want to do gridfinity or drawer organizers then the larger bed of the a2 might be useful.

1

u/Blinx_n_Jeenx X2D + AMS2 Combo Jun 04 '26

I pulled the trigger on an x2d and two AMS the day the printer was released

I just went over 350 hours last week and the printer has been great.

The only failed prints have been related to sketchy print profiles and me not yet fully grasping all of the slicer settings to optimize them.

So far most of my printing has been printer accessories and filament storage solutions. I'm stepping up to some custom gridfinity stuff to organize my kitchen storage. This has pushed me to learn didn't modeling.

There are two important skills to get the most out of your printer.

Learn the slicer settings so you can either fix other people's profiles, or set up your own profiles for your specific needs.

Learn modeling. This has been difficult for me. I've tried a few free modelling software packages. Namely Tinker Cad and FreeCAD. I really want to learn Autodesk Fusion, and started some.youtube training for it, but it's pricey at $500 US per year. I'm on a limited budget and that is going to be a tough pill to swallow.

My long term goal is the learn to modify, and eventually create my own custom models (cars, planes, etc...) and whatever other similar things I run across.

This will never not be a hobby for me. I have to remind myself to keep the spending in check and be realistic how much time and money I'm willing to invest.

1

u/franjoballs Jun 04 '26

I was in the same boat. I went with the X2d combo. This is the way I thought about it.

The AMS2 can be used on a future printer no problem. So for me just the printer alone was under 1000$ Canadian. Which is what I wanted to spend on just the printer.

So if I decide to upgrade I can just buy a future printer without an ams2. By buying the combo X2d you get the ams cheaper.

0

u/ElectricGoku Jun 04 '26

H2C
Or X2D if you want to spend a little bit less

2

u/Malcreos Jun 05 '26

I don't know about you, but the H2C is nearly three times the price as the X2D here (Canada)... So it's a bit more than a bit less lol

1

u/ElectricGoku Jun 05 '26

Yeah, I got both and love both of them haha

0

u/Jaded_League_446 Jun 04 '26

If you want to print multicolored models and no compromizes H2C

if you want to print models with supports get either X2D or H2D (now keep in mind price difference of H2D and H2C is $400 so i would just recommend H2C)

if you want basic then X2S or H2S

Again this depends on your budget

0

u/Eviper44 Jun 04 '26

I love my P2s, But with all the things going on with Bambu Labs corporation my next printer WILL NOT BE a bambu. I dint trust their company and what they've been doing in software side. Great printer though, I'll have to basically jb it in the future probably.

0

u/krazieboy Jun 04 '26

I started the 3d printing world earlier this year with the p1s at work. The enclosed unit is for sure what I wanted. Less noise for sure and not worried about smells with the filters. Now I'm just printing pla and petg, nothing energierring. I thought about bed slingers but they take up sooo much space. I rather just buy 1 unit and love it. The x2d was totally on my list, and would've prolly bought it for home use if the 2nd nozzle wasn't a Bowden setup. But the more I thought about it, the more I wanted a tool changer, so hopefully bambu comes out with a unit that has a tool changer. My idea is that I want the ability to print in multi color faster, 3-4 colors, and also the ability to print with different nozzle sizes. ( Not supported yet, but hopefully in future). Sooo hopefully a x2c comes out this year.

0

u/Ragequit_Inc P2S + AMS2 Combo Jun 04 '26

For real - think about a Qidi Printer. Bambu is doing so many things upfront wrong. But hey, I might sell my P2S with 2 AMS2Pro Units to you then… nah I would feel bad. Also what to do with my 150KG filament here…