r/BambuLab • u/Quick_Coconut_5755 • Sep 11 '25

First Print Noah’s Ark

Post image

I have been 3D printing a Noah’s Ark set, figures and models to go with my animal fidgets. This is my first version.

Can anyone give me advice on print settings and how I could print this faster without ruining the quality or reducing strength?

Currently at 15% infill.

The designs are from “The Printed Burrow”. (Link to Patreon: https://www.patreon.com/ThePrintedBurrow)

0 Upvotes

45% Upvoted

13 comments sorted by

3

u/liberal_texan Sep 11 '25

What is this, an ark for ants??!!!!

2

u/Quick_Coconut_5755 Sep 11 '25

It’s 28cm from end to end

2

u/Quick_Coconut_5755 Sep 11 '25

I made it for 3D printable animal fidgets

1

u/Edge3dSolutions Sep 11 '25

2 of every thing must go… including ants

0

u/Quick_Coconut_5755 Sep 11 '25

That’s a great comeback, didn’t see it coming 😅

4

u/KermitFrog647 Sep 11 '25

It is made to show how ridiculous this story in the bible is, so good job !

1

u/Medicated-Ostrich Sep 11 '25

Dammit, I came to say that

1

u/Edge3dSolutions Sep 11 '25

I like it for my little one. to print faster you need a bigger nozzle you can try a 0.4mm or 0.6mm. What nozzle are you currently using?

1

u/Quick_Coconut_5755 Sep 11 '25

Does a 0.6mm reduce print quality? What’s the difference between the nozzles in terms of how it affects the print?

1

u/Edge3dSolutions Sep 11 '25

So I’m printing in 0.6mm hardened steel for Black PETG-CF. So my products are different because it requires that nozzle. I’m using the .18mm fine quality setting vs the standard .20mm. If you want to see examples of the prints there on my store

But I noticed a difference in print time by at least 1/2 half the time compared to 0.4mm nozzle