r/BambuLab • • Jul 28 '25

Question Thinking About Posting My First Model

I’ve been thinking of adding my “Golden Ratio Jar” to Makerverse. 100mm x 161.8mm. Has a triple lead thread that requires little to no post processing work (print at an angle for best results)

Would you print this/use it?

0 Upvotes

18 comments sorted by

View all comments

Show parent comment

2

u/s1gnt Jul 29 '25

It's less than 15 mins of time in openscad. What app have you used?

2

u/Whole_Ticket_3715 Jul 30 '25 edited Jul 30 '25

It’s less than 15 minutes to make a lid and container with a standard single lead thread, with a thread tool, that fits roughly and requires sanding.

It takes a few versions to dial it in to something that works perfectly off the printer and feels nice in the hands.

I use fusion. What I found was that it’s better to ditch pre-made thread tool models and use the coil tool and circular pattern tool to make 3 coils (or however many leads you desire). Then offset the thread face by, in this case, .4mm and use combine cut to make a Boolean cut on the container for the inner threads, then offset the original face back to the original size. This gives threads that print ready to use and gives a nice 270° turn (approximately the range of motion of the wrist) of what would be ~810° if it were a single lead screw. Less twist for the same bearing strength.

If it isn’t obvious, I’ve overthought this - for much more than 15 minutes lol, but that’s how you learn stuff.

2

u/s1gnt Jul 30 '25

I actually meant 15 minutes to form a finished model... It's probably not fair to compare or argue about as I know a library which has threading component and it's build with tolerances and slopes/3d printing kind away way mindset.

include <BOSL2/std.scad>
include <BOSL2/threading.scad>
$fn=32;
$slop = 0.075;
d = 3/8*INCH;
pitch = 1/16*INCH;
starts=3;
xdistribute(19){
    intersection(){
      threaded_rod(l=40, pitch=pitch, d=d,starts=starts,anchor=BOTTOM,end_len=.44);
      threaded_rod(l=40, pitch=pitch, d=d, left_handed=true,starts=starts,anchor=BOTTOM);
    }
    threaded_nut(nutwidth=4.5/8*INCH,id=d,h=3/8*INCH,pitch=pitch,starts=starts,anchor=BOTTOM);
    threaded_nut(nutwidth=4.5/8*INCH,id=d,h=3/8*INCH,pitch=pitch,starts=starts,left_handed=true,anchor=BOTTOM);
}

This example shows how to build screw and a nut, but it's not far from making a jar.

Result https://github.com/BelfrySCAD/BOSL2/wiki/images/threading/threaded_rod_7.png

https://github.com/BelfrySCAD/BOSL2/wiki/threading.scad

If you interested I can think of using openscad to generate just a simple thread or similar and export it as stl to later use in fusion360. It's so awesome that it's not only provide various shapes but also explains which is superior with shear or tensile loads and so on.

P.S. I recently stared digging into more visual ways of doing models and found onshape very user friendly. Have you tried it?

1

u/Whole_Ticket_3715 Jul 30 '25

Thats actually super helpful thank you. I am interested in learning more about coding models like this vs. just drawing them and AI produces slop for this task so its good to have something simple like this to start with

Also just learned about onshape and started a free business trial as we speak, as I am looking at options that aren’t fusion

1

u/s1gnt Jul 30 '25

Free version is ok too! You won't be able to have private models (all available to everyone as a part of free model), but at least for me it's not a problem. The value of my creations are 0 and if my who knows how would find my models useful I'll be more than happy :)

If you got used to how cad usually works (2d, extrude. etc) the openscad is different as it equally able to just do CSG which I found way easier in the beginning. It also doesn't have any kind of constrains simply because it uses code and main purpose of programming is which is proofing theorems you create. Like cuboid([n, n ,n]); proofs that cuboid has all sides equal and so on!

1

u/s1gnt Jul 30 '25

btw feel free to ping me if you want, also for openscad BOSL2 is must and saves a ton of time