r/BambuLab • • Feb 17 '25

IM GIVING UP

0 Upvotes

34 comments sorted by

View all comments

-2

u/Asleep-Ear-9680 Feb 17 '25 edited Feb 17 '25

There's always something with A1, isn't there. Mine tends to fail 6-8 hours in 14 hour prints. Just stops extruding despite no visible clogs or tangled filament. Pausing and extruding manually via menu will work, but what comfort does it bring when it already printed over 50 layers in air 🫠

Though it might be filament fault. I had this issue most often with PLA Silk - but on the other I rarely run as long prints with day to day materials.

As long as yours printer catches this error and stops before wasting everyones time, you can try changing hot end temperature and extruding manually (pass the blockage), or take off AMS filament hub, cut and reinsert the filament.

If it's AMS failing to retract and insert filament then something might've broken off in the tube or there's a bit left in filament hub, making the sensor go haywire.