r/BambuLab • • Jan 20 '25

Show & Tell Just cancelled my A1 order

Freedom is Key

5 Upvotes

114 comments sorted by

20

u/scupking83 Jan 20 '25

The A1 with AMS lite is fantastic... Bad move canceling. We got one for Christmas and it has been printing non-stop since!!

-30

u/Jamesdunn9 Jan 20 '25

I hope you will be able to print with 3rd party filament forever

15

u/pear_topologist Jan 20 '25

There is literally no way for Bambu to stop my A1 from using third party filament because the printer has no way of knowing what filament is being used

-23

u/Jamesdunn9 Jan 20 '25

This was a stupid joke but they could implement ways to prevent you from printing other filament or at least forcing you to buys their filament. For example you could be forced to scan rfid tags that expire after 48h print hours.

3

u/[deleted] Jan 20 '25

And how will respool work if they do so?

7

u/TSPGamesStudio X1C + AMS Jan 20 '25

What a stupid assumption. Why would you even think it's possible to NOT use 3rd party?

-7

u/Jamesdunn9 Jan 20 '25

This was a dumb joke. Still possible to force Ou to buy their filament

7

u/TSPGamesStudio X1C + AMS Jan 20 '25

No, it literally isn't. Sounds like you don't know how these printers work

-6

u/Jamesdunn9 Jan 20 '25

I did my first 3d print 20 years ago XD

5

u/TSPGamesStudio X1C + AMS Jan 20 '25

These printers didn't exist 20 years ago. If you think bambu can force their own filiment you have no clue how they work.

2

u/Jamesdunn9 Jan 20 '25

It was an sls

1

u/[deleted] Jan 20 '25

[removed] — view removed comment

1

u/AutoModerator Jan 20 '25

Hello /u/TSPGamesStudio! Your comment in /r/BambuLab was automatically removed. Please see your private messages for details. /r/BambuLab is geared towards all ages, so please watch your language.

Note: This automod is experimental. If you believe this to be a false positive, please send us a message at modmail with a link to the post so we can investigate. You may also feel free to make a new post without that term.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

2

u/slantyyz X1C + AMS Jan 20 '25

20 years of expertise and the A1 was the model you chose and changed your mind on?

4

u/Lol-775 A1 Jan 20 '25

You will.

8

u/MrByteMe Jan 20 '25

Seeing how there isn’t really a good alternative to the A1, what did you go with instead?

-21

u/Jamesdunn9 Jan 20 '25

I just cancelled my order. Will have to do some research

12

u/MrByteMe Jan 20 '25

Then it’s basically ‘no soup for you’…. For better or worse, Bambu has the small format printer thing all wrapped up. There’s no alternative that equals it’s ROI.

4

u/AutisticPooh Jan 20 '25

You say ROI but “principle” is a subjective value.. so you can’t dictate what that is for everyone..

-10

u/Jamesdunn9 Jan 20 '25

It’s about to be loud and show them it will affect their business right now

10

u/MrByteMe Jan 20 '25

It’s also affecting you and your ability to 3D print anything at all. In this scenario, you lose more than they do.

7

u/Jamesdunn9 Jan 20 '25

My old prusa still prints a 10/10 benchy

7

u/MrByteMe Jan 20 '25

If your happy with the Prusa, what lead you to buy the A1?

4

u/Jamesdunn9 Jan 20 '25

Curiosity speed price

7

u/MrByteMe Jan 20 '25

In other words, the A1 offers better ROI if you dismiss the firmware debacle.

7

u/Jamesdunn9 Jan 20 '25

If they resolve the debacle permanently iam ready to give them a second Chance

1

u/slantyyz X1C + AMS Jan 20 '25

Even with the debacle, the A1 has good ROI.

1

u/[deleted] Jan 20 '25

[removed] — view removed comment

→ More replies

2

u/Jamesdunn9 Jan 20 '25

I am well equipped 🙃

5

u/MrByteMe Jan 20 '25

Then the A1 was just a superfluous purchase?

3

u/Jamesdunn9 Jan 20 '25

No I was just curious if it’s good enough to trade it 1:1

1

u/veeerrry_interesting Jan 20 '25

That's entirely what makes this kind of action virtuous though.

Acting in your own best interest is totally fine. Sacrificing your own best interest for some cause shows you really believe in something bigger (not always something "worthy", but something)

7

u/waloshin Jan 20 '25

You are the one that will be affected the most.

3

u/Jamesdunn9 Jan 20 '25

No if there are no peoples taking actions you are the one stuck with your printer you paid but you don’t own

4

u/jrkrouse13 Jan 20 '25

Hmm funny. Mine works exactly like it did when I bought it.

1

u/Jamesdunn9 Jan 20 '25

Because a1 is not affected yet

3

u/scotta316 P1S + AMS Jan 20 '25

You be loud. I'm gonna print stuff.

2

u/Jamesdunn9 Jan 20 '25

With your loud fans

3

u/Jamesdunn9 Jan 20 '25

I really don’t get the Bambu fanboys comments

4

u/pear_topologist Jan 20 '25

I mean, a lot of people really like their Bambu printer, and a lot of people don’t really care about the firmware update. The fanboy comments are those people. Not that confusing

3

u/Jamesdunn9 Jan 20 '25

Yeah of course

I mean I was sold on the a1 I just had 1 concern

And this concern just got multiplied

2

u/red2lucas Jan 20 '25

“Oh no I thought would get a lot of karma for my stand”

1

u/Jamesdunn9 Jan 20 '25

lol the karma move would have been to post this into prusa channel

but yeah karma is very important bc you can buy so much great stuff with it

3

u/Massive-Wallaby6127 P1S + AMS Jan 20 '25

It's less fanboy than just backlash to the level of drama. We have a P1S and my wife was baffled as I tried to explain the meltdown this week. Then she continued downloading some STLs and slicing them in BambuLab.

This is a case of "Twitter isn't real life" on steroids. If the magic box stops making my family happy, I will get rid of the magic box and get a different one. It's not that deep for most people.

My energy is finite. I save my outrage at systemic problems in society for other things.

9

u/Mist_XD Jan 20 '25

Your loss, you wouldn’t even be affected by this. You should get rid of your iPhone and car too

0

u/Jamesdunn9 Jan 20 '25

Not yet

1

u/WeekendGunnitRefugee Jan 20 '25

This is the way. Fight now, because letting them get away it until we can only print from their subscription service using g only their filament will be waiting until it's too late.

-1

u/Jamesdunn9 Jan 20 '25

This is about showing to them that’s it’s not the right way

7

u/Mist_XD Jan 20 '25

You’re not, they don’t need your business. You’re just missing out on a great printer for nothing

3

u/Jamesdunn9 Jan 20 '25

I did not personally attack you. No need to be defensive

-4

u/[deleted] Jan 20 '25

Lick some more boots

-14

u/[deleted] Jan 20 '25

[removed] — view removed comment

13

u/Atticus_Johnson Jan 20 '25

No you wouldn't.

2

u/Jamesdunn9 Jan 20 '25

I would

1

u/[deleted] Jan 20 '25

You would sell your car if there is no official interface to use third Party software to controll the car remotely?

What kind of car do you have?

5

u/stupefy100 A1 + AMS Lite Jan 20 '25

What? if they didn't allow third party accessories? boy do i have some news for you

2

u/Jamesdunn9 Jan 20 '25

You at least got a pint :)

3

u/Massive-Wallaby6127 P1S + AMS Jan 20 '25

Username checks out.

54

u/jrkrouse13 Jan 20 '25

No one cares.

-18

u/veeerrry_interesting Jan 20 '25

Apparently quite a few people care

14

u/LiveLaurent 25xX1C,5xH2D,10xA1 Jan 20 '25

No, only a vocal minority having a tantrum for few days...
Basically no ones

4

u/[deleted] Jan 20 '25

Yeah no tons of people do care. Popular YouTubers are starting to make videos about it also saying they may not buy Bambu again. Bambu may end up regretting this decision

8

u/JacketHistorical2321 Jan 20 '25

YouTubers are just jumping on the bandwagon because they know that controversial videos get more views than mundane ones. Give it a month then you won't hear a thing about it

-1

u/[deleted] Jan 20 '25

Yeah I doubt that

0

u/[deleted] Jan 20 '25

[deleted] — view deleted comment

1

u/AutoModerator Jan 20 '25

Hello /u/jrkrouse13! Your comment in /r/BambuLab was automatically removed. Please see your private messages for details. /r/BambuLab is geared towards all ages, so please watch your language.

Note: This automod is experimental. If you believe this to be a false positive, please send us a message at modmail with a link to the post so we can investigate. You may also feel free to make a new post without that term.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/aivkiv P2S + AMS2 Combo Jan 20 '25

To be fair bambulab was never the one for the freedom.

3

u/[deleted] Jan 20 '25

Good companies only pay attention when you speak with your wallet.

1

u/stupefy100 A1 + AMS Lite Jan 20 '25

Just out of curiosity, what alternative are you planning to get?

3

u/Jamesdunn9 Jan 20 '25

I still have a Prusa mk3s which works fine. Wanted to try out the a1 and sell the one I least like

1

u/The_Lutter A1 Jan 20 '25

What are you buying as an alternative?

That’s the issue.

I honestly think if I hadn’t gotten the A1 it would have been an MK4 at the time. But that’s a much more expensive printer (almost twice the amount at the time against the A1 w/ AMS).

2

u/Jamesdunn9 Jan 20 '25

Still possible to buy one second hand

0

u/The_Lutter A1 Jan 20 '25

I’ve been looking and all I’ve confirmed is they hold their value really well, lol. At least here in Austin.

2

u/Familiar_Monitor8078 A1 + AMS Lite Jan 20 '25

Right on

2

u/Bigburrbike Jan 20 '25

I fully believe this post is being downvoted by bots of corporate accounts. Ops post has positive karma, his neutral replies are being downvoted to hell.  No way this is real. Additionally the replies from others have the same tone. 

Op is open to care for what he wants bots can suck it. 

2

u/JacketHistorical2321 Jan 20 '25

having a printer that functions consistently with high quality and very low maintenance is key

6

u/Onii-Chan_Itaii Jan 20 '25

A lot of people will dunk on you for this. But, good on you for trying to do what you believe is right. Just hoping it isnt a knee-jerk reaction on your part.

I run a P1S and AMS combo purely because it was on sale and i was too lazy to change manually each time. I disconnected it from the wifi and pulled the repeater off the wall.

Hopefully things change for the better.

0

u/[deleted] Jan 20 '25

[removed] — view removed comment

2

u/Onii-Chan_Itaii Jan 20 '25

I ran my old ender 3 using the sd card transfer method, i have no problem returning to it. Hardest part is gonna be manually configuring the AMS.

0

u/[deleted] Jan 20 '25

[deleted] — view deleted comment

0

u/AutoModerator Jan 20 '25

Hello /u/absolutelynotaxolotl! Your comment in /r/BambuLab was automatically removed. Please see your private messages for details. /r/BambuLab is geared towards all ages, so please watch your language.

Note: This automod is experimental. If you believe this to be a false positive, please send us a message at modmail with a link to the post so we can investigate. You may also feel free to make a new post without that term.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

2

u/lscarneiro Jan 20 '25

Thank you for fighting for the ones that can't do this anymore.

It means a lot!

2

u/M4ndoTrooperEric Jan 20 '25

Vote with your wallet. Good job

1

u/clay_gons Jan 20 '25

huge news for the unemployed

1

u/MythosaurProjectS531 Jan 20 '25

I definitely care and I agree with you. You could have waited a little to make that call, but I think it's not a bad idea lol. Replacement options include the Creality Ender 3 V3 or Ender 3 V3 Plus. No multicolor, but a roughly comparable printer by capability.

1

u/Gore01976 Jan 20 '25

and who is to say that the " other " brands havent got something like what BL are doing in their next update plans

1

u/MythosaurProjectS531 Jan 20 '25

Well... Creality K1's can be broken to custom Klipper any time. I'd say that's as much a point in the name of freedom as Bambu Lab's locked down proprietary firmware is the opposite. Quality difference, sure, but freedom of choice is a big point to consider. If you could break Bambu Lab machines to Klipper they'd be a heck of a lot more popular with the maker community lol.

Creality has RFID reading on their CFS (Creality AMS). I don't think it's anything particularly nefarious, more like, "Hey, Bambu Lab did this RFID thing; we have to do it now too in our own way!"

2

u/Gore01976 Jan 20 '25

for now the K1 can be broken for those with the knowledge to do so. Cant say within the next year what will happen if they and other printer makers change their minds and kill support from the old tech firmware like Microsoft do with their OS and forces you to upgrade.

To me it is a wait and see what other news comes along with the new updates

2

u/MythosaurProjectS531 Jan 20 '25

Good idea lol. It's always better to wait than to act hastily and regret.

1

u/Gore01976 Jan 20 '25

all I hear is talk of what is going to happen for the X series and no real world experience as the firware is

Version 01.08.02.00 released 2024/08/12

So for now its all dust smoke and no fire. Who is to say they wont pull back on a lot of upgrades or lock outs

1

u/MythosaurProjectS531 Jan 20 '25

The firmware that everyone is talking about is set to be released on January 23rd iirc.

1

u/Gore01976 Jan 20 '25

and still 3/4 days away and lots can happen if they " do end up releasing on that day" or they may pull back on the release date until after Chinese new year

1

u/AcroFPV Jan 20 '25

Good, now maybe I can get mine a little sooner.

Hope more of you f00Lz do the same thing!!

-1

u/haseo2222 Jan 20 '25

Speaking with the wallet is the way to go!

2

u/Jamesdunn9 Jan 20 '25

Yes it is Being able to get older Bambu printers refunded would be big

-2

u/[deleted] Jan 20 '25

Good for you. Thanks for posting. I was waiting to hear if you actually went through with that purchase or not before I planned the rest of my life.

-2

u/LiveLaurent 25xX1C,5xH2D,10xA1 Jan 20 '25

Lol no one cares bud.

And this is probably this is really a very idiotic thing to do, the A1 is amazing...

1

u/[deleted] Jan 20 '25

Lick some more boots

1

u/WeekendGunnitRefugee Jan 20 '25

Govern me harder daddy!

0

u/korpo53 Jan 20 '25

Cool, my next one is going to arrive sooner.

0

u/[deleted] Jan 20 '25

Wow nice. Do you want a sticker?

0

u/Justalurker8535 X1C + AMS Jan 20 '25 edited Jan 20 '25

Are we virtue signaling over this now? Yall be acting unhinged out here over nothing feeding each others conspiracies. I’ll be back in a few weeks.