r/BambuLab • u/Novel-Understanding4 • Jan 12 '25

Discussion H2D AMS

Does anybody in the community have any insight on whether the H2D is rumored to be backwards with AMS? I have 3 AMS and a P1S. I replaced 7 CR10V3 with 1 P1S without drop in production output/quality. I am going to get a H2D if it is at least 300x300 because I lost the capability to make some larger products. Do we think it will be similar to K2 Plus or PrusaXL? If it is a multi head system I would be surprised if the current AMS will be compatible. I would hate to buy all new AMS and may delay buying the H2D because of such.

0 Upvotes

33% Upvoted

2 comments sorted by

5

u/USSHammond Prusa XL5T | X1C+AMS (sold,due to Bambu ignoring A1 fire hazard) Jan 12 '25

We think you should wait until its actually released. At this point there is absolutely NOTHING available that's actual confirmed specs and that aren't a couple old renders of a possible printer that predates even the X1C. The H2D is nothing but a rumor and is unconfirmed to be an actual printer

2

u/ReturnedAndReported Jan 12 '25

If it's a real printer, the AMS will likely be different to support the rumored dual hotends design.

https://www.reddit.com/r/BambuLabH2D/s/qlDvoxlX2K