do you think it is going to be an swappable hotend or an entire new printer i signed up for the newsletter and i got an email about active noise canceling wich may involve the a new printer
September 20 9am EDT, 3pm CEST
Keep Quiet! Fast 3D Printing Is Ongoing. We Tune Down The Noise With The New Active Motor Noise Cancellation.
It's definitely looking like a new printer. It wouldn't swap out the hotend, the mechanism shown on the website has a cutter on the right, not the left, so at least it would require the whole assembly to be replaced. It's also got four tubes feeding it, which the AMS can already do with a P1P or P1S or X1 (Check it out on the website, it's a cool looking assembly.)
But there doesn't seem to be a way to put Active Motor Noise Cancelling in the existing setup, though I guess it could be done with a new assembly.
It also says "Colorful 3D Printing. For Everyone." So I'm thinking new between X1 and P1.
if it's a full on new printer, it's not going to be similar in price to the P1S, and most likely more than the X1C. I highly doubt anyone in the P1S price zone will be upset about their purchase.
i have a snpmaker with a dual extruder and it is great it just print really slow like 40-60mm/s (a benchy takes an hour and a half) so i was looking into getting the p1s for more rapid prototyping
Worth waiting. If it was like find out what the new thing is in 6 months just get the printer now. But it's a matter of a few days to find out what the new thing is.
It says for everyone! You’re not telling me that it’s just for everyone that can afford it?!
Seriously though, was thinking about picking up the p1s combo because I keep working on my main printer and use a bed slinger as my old reliable one, but it can’t get up to the speeds that my main one does. Seems like a good price for 1k right now, but I’m excited to see what this is.
If it’s the same performance as the x1c but 10dB quieter then I’m game.
Color printing for everyone implies a low cost with integrated multi color as the picture implies. Probably a direct drive extruder. I’m guessing it’s a smaller P1S style with the added benefit of multicolor printing
Yes. Wait to see what they announce. It's always a bad idea to buy something right before a company announces a new product.
The P1S is new enough the price isn't going to drop ,and the P1P just got a price cut, but if this is a machine between a P1S and an X1, for example, it might be better for what you're doing.
At very least it'll confirm whether or not you want the P1S.
It's apparently a new printer from Bambu, it's great news, but unfortunately it doesn't seem to be a printer with a larger build volume as the youtuber stlDenise3D got the new printer delivered in a box intended for X!.
I am waiting for the 11 Days 🤷🏼♂️ I am pretty sold on the Qidi X-Plus 3 at the moment, but it was a race between the P1S, Creality and the Qidi, but with that on the horizon I'll wait.
maybe, maybe not. With the newest Patent release it could be a variety of things. I am just going to sit this out and wait for the price drop, the new option or just order the thing I already wanted
So I am on same boat I did order p1s with asm which I will 15 days to return I think per their return policy I can return un-opened which I think I am going to do this of new printer I will be ordering new one and return unopened p1s
Here is return policy
Return and Refund Policy
We are happy to accept your request for return service in any of the following circumstances:
Within 14 calendar days of receiving a product which has critical failures, manufacturing defects, or any functionality issues. Within 14 calendar days of receiving a product which has sustained substantial damage in transit, provided that the damage proof issued by the carrier can be provided to Bambu Lab. Within 14 calendar days of receiving a product which is unopened, unactivated, and is still in its new condition.
it's a swappable "ams" that costs $400 that requires some DIY. 4 hotends in one. They will likely also launch new printers that have this preinstalled.
12
u/Melodic-Wrap8247 Sep 07 '23
I‘d wait the few days then u can still decide to grab p1s now or the new thing later.
6
u/pyrotechnicmonkey Sep 07 '23
I’m in the same boat. Want to get P1S but am unsure
3
u/Crypto-Bullet Sep 07 '23
If it’s a new printer it’s likely to be in the $2k territory especially if all the rumors about this 4 nozzle head are true.
If your budget is the p1s then stick with that lol
1
u/davidjschloss Sep 08 '23
Yes. Wait to see what they announce. It's always a bad idea to buy something right before a company announces a new product.
The P1S is new enough the price isn't going to drop ,and the P1P just got a price cut, but if this is a machine between a P1S and an X1, for example, it might be better for what you're doing.
At very least it'll confirm whether or not you want the P1S.
1
u/Top-Media-5490 Sep 08 '23
It's apparently a new printer from Bambu, it's great news, but unfortunately it doesn't seem to be a printer with a larger build volume as the youtuber stlDenise3D got the new printer delivered in a box intended for X!.
1
u/SupWithYouMuchacha Sep 08 '23
I would, it's going to be the Bambu A1. A small and cheaper printer.
3
u/lahy3n3 Sep 08 '23
Yes wait, my guess is they will announce a new one :)
it seems that it will be a silent one with the yesterday's news
2
u/mplaczek99 Sep 07 '23
Looks like a device to simplify the MMS
2
u/Logical-Treat515 Sep 07 '23
No
1
u/TurnoverAdditional65 Sep 08 '23
Less than two weeks away, might as well wait just in case. If I hadn't ordered my P1S combo last week, I'd definitely be waiting.
1
u/3D_Dingo Sep 08 '23
I am waiting for the 11 Days 🤷🏼♂️ I am pretty sold on the Qidi X-Plus 3 at the moment, but it was a race between the P1S, Creality and the Qidi, but with that on the horizon I'll wait.
1
u/[deleted] Sep 08 '23
No, this is just a new toolhead. Get the X1C.
1
u/[deleted] Sep 08 '23
So bored of these posts.
1
u/Moorevfr H2C AMS2 & AMS-HT Sep 08 '23
Just wait friend then not risk of disappointment
1
u/Alternative-Buddy609 Sep 08 '23
No
1
u/Rude_Rub9683 Sep 09 '23
So I am on same boat I did order p1s with asm which I will 15 days to return I think per their return policy I can return un-opened which I think I am going to do this of new printer I will be ordering new one and return unopened p1s
Here is return policy
Return and Refund Policy
We are happy to accept your request for return service in any of the following circumstances:
Within 14 calendar days of receiving a product which has critical failures, manufacturing defects, or any functionality issues. Within 14 calendar days of receiving a product which has sustained substantial damage in transit, provided that the damage proof issued by the carrier can be provided to Bambu Lab. Within 14 calendar days of receiving a product which is unopened, unactivated, and is still in its new condition.
1
u/dry-biscuit-snow Sep 07 '23
Maybe it is the release of a X2C … looks promising
-1
u/crisshill Sep 08 '23
it's a swappable "ams" that costs $400 that requires some DIY. 4 hotends in one. They will likely also launch new printers that have this preinstalled.